Abstract:Understanding flame acceleration (FA) and deflagration-to-detonation transition (DDT) is important for combustion applications. However, DDT is a high-speed, nonlinear and complex process and the exact underlying mechanisms remain unclear, especially for narrow channels with a width smaller than detonation cell size. In this paper, numerical simulations were carried out to study the FA and DDT in a stoichiometric hydrogen-air mixture in narrow channels with width on the order of magnitude comparable to laminar flame thickness. The fully-compressible reactive Navier-Stokes equations were solved by using a high-order numerical method. Hydrogen-air combustion was taken into account using a calibrated simplified chemical-diffusion model. Four different channel widths, i.e., d = 2.0 mm (similar to 6 delta(1)), 1.0 mm (similar to 3 delta(1)), 0.5 mm (similar to 1.5 delta(1)), 0.25 mm (similar to 0.7 delta(1)), were considered in the simulations to explore the size effect, where delta(1) is the laminar flame thickness. The results show that the FA is mainly determined by boundary layer effects for all the channels considered. In the early stages, the flame keeps accelerating due to the stretching effect of boundary layer that leads to a significant increase in flame surface area. In the later stages of acceleration, an ultra-fast flame develops in the boundary layer ahead of the flame front due to the viscous heating effect associated with wall friction. It was found that the DDT mechanism is essentially consistent in all the channels. Detonation arises from the contact of two neighboring flame fronts in the shocked region that is vulnerable to a mild temperature gradient or fluctuation. The contact of the two high-temperature reaction fronts instantly causes a very high concentration of heat flux and consequently a detonation wave emerges from the contact spot. The detonation propagation after DDT, however, depends on the channel width. When d >= 1.5 delta(1), a quasi-steady or a single-head detonation forms and sustains until the end of the combustion. For the case of d < 1.5 delta(1), the detonation decays into a high-speed flame. When the channel width is sufficiently small, e.g., d similar to 0.7 delta(1), detonation initiation can occur occasionally, but soon decouples into a shock and a flame. (C) 2022 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.

Experimental studies of combustion processes of stratified and uniform hydrogen-air mixtures

Distribution and Combustion of Hydrogen and Methane Mixtures with Air in a Container with Baffles: An Investigation

Experimental study on combustion and explosion characteristics of hydrogen-air premixed gas in rectangular channels with large aspect ratio

Hydrogen influence on confined explosion characteristics of hydrocarbon-air mixtures at sub-atmospheric pressures

Hydrogen-air explosion with concentration gradients in a cubic enclosure

Sudden acceleration of flames in open channels driven by hydraulic resistance

Development of a hydrogen-air flame in a vertical channel with a horizontal diaphragm

Confined combustion of lean hydrogen-air mixtures with suspended water micro-droplets

Experimental Study on Pressure and Flow Characteristics of Self-Ignition Hydrogen Flowing into the Unconfined Space

Premixed Flame Propagation in Hydrogen Explosions

Investigation on the Flame and Pressure Behaviors of Vented Hydrogen-Air Deflagration from a Duct-Connected Vessel: Effects of Venting Diameter and Static Activation Pressure

Experimental study of the hydrogen leakage and ignition in a¬†ventilated room

Recent Advances in Hydrogen Process Safety: Deflagration Behaviors and Explosion Mitigation Strategies

Flame Front Dynamics in Flow of Hydrogen-Air Mixture in a Channel with Sudden Expansion and Polyurethane Foam

Flame Acceleration and Deflagration-to-detonation Transition in Narrow Channels Filled with Stoichiometric Hydrogen-Air Mixture

Experimental Study on the Influence of Ignition Position on the Overpressure of Hydrogen Jet Flame

Numerical study on forced ignition and flame propagation in a counterflow of nitrogen-diluted hydrogen versus air

Experimental investigation of spontaneous ignition and flame propagation at pressurized hydrogen release through tubes with varying cross-section.

Large-scale flame structures in ultra-lean hydrogen-air mixtures

Analysis of combustion models of hydrogen-air mixtures using ANSYS FLUENT

Propagation characteristics and inherent instability of hydrogen-air premixed flame with inert gas dilution