Abstract:Hydrogen is widely perceived as the next generation of clean energy due to its zero carbon emissions. However, there is an escalating concern regarding hydrogen safety. A deeper understanding of the ignition characteristics of hydrogen in inhomogeneous environments is imperative for enhancing our physical comprehension and conducting accurate risk assessments. The purpose of this study is to delve into the ignition phenomena of hydrogen and air in a non-premixed counterflow . Transient two-dimensional simulations are performed, considering detailed chemistry and transport. The focus is placed on the effects of strain rate, mixture stratification, and ignition position on ignition and flame propagation. The first part studies the ignition process at varying strain rates while the ignition position is fixed at the stagnation point . The results show that a low strain rate has a minimal impact on ignition outcome, whereas a high strain rate hinders ignition by reducing mixing layer thickness and residence time. As a result, the minimum ignition energy (MIE) barely changes at a relatively low strain rate but rises rapidly as the strain rate approaches the extinction limit. Subsequently, ignition is studied at different positions along the symmetry axis , where the flow field and mixture composition vary simultaneously. It is demonstrated that ignition is more feasible on the lean side than on the stoichiometric and rich sides, and a high strain rate can expand the ignitability limit of the mixture fraction under extreme off-stoichiometric conditions. The separate contributions of forced convection and mixture inhomogeneity are further assessed through simulations with and without counterflow and stratified mixture. The results suggest that the significance of the forced convection is contingent upon the timescale competition between flow and ignition, while the mixture stratification determines the evolution of the ignition kernel into either an outwardly propagating premixed flame or a triple flame. The MIEs at premixed and non-premixed conditions are examined, and the influence of fuel stratification is analyzed. In the end, a regime diagram is presented, illustrating the comprehensive roles of strain rate and mixture fraction during ignition. This study provides invaluable insights into the non-premixed ignition of hydrogen in complex flow conditions.

Analysis of combustion models of hydrogen-air mixtures using ANSYS FLUENT

CFD simulations of hydrogen deflagration in slow and fast combustion regime

Flamelet modeling of forced ignition and flame propagation in hydrogen-air mixtures

Flame Structure Analysis and Composition Space Modeling of Thermodiffusively Unstable Premixed Hydrogen Flames — Part I: Atmospheric Pressure

Flame Structure Analysis of Turbulent Premixed/stratified Flames with H2 Addition Considering Differential Diffusion and Stretch Effects

Unsteady Regimes of Hydrogen Ignition and Flame Stabilization in a Channel

Numerical Modelling of Combustion Process with the Use of ANSYS FLUENT Code

Flame kinetic behavior of premixed hydrogen-air explosion in an obstructed channel

Turbulent Flame Propagation in Hydrogen-Air and Methane-Air Mixtures in the Field of Synthetic Turbulence: Direct Numerical Simulation

Effects of hydrogen addition on the propagation of spherical methane/air flames: A computational study

An Arrhenius-based one-step reaction mechanism for hydrogen-air flames simulations in an extended range of operating conditions

Laminar flame speed modeling of pre-vaporized jet fuel/hydrogen mixtures under engine conditions

Turbulent Premixed Flame Modeling Using the Algebraic Flame Surface Wrinkling Model: A Comparative Study between OpenFOAM and Ansys Fluent

Numerical study on forced ignition and flame propagation in a counterflow of nitrogen-diluted hydrogen versus air

Experimental study on combustion and explosion characteristics of hydrogen-air premixed gas in rectangular channels with large aspect ratio

Propagation characteristics and inherent instability of hydrogen-air premixed flame with inert gas dilution

Experimental studies of combustion processes of stratified and uniform hydrogen-air mixtures

Direct pore-level simulation of hydrogen flame anchoring mechanisms in an inert porous media

Experimental study on the propagation characteristics of hydrogen/methane/air premixed flames in a narrow channel

Flame Front Dynamics in Flow of Hydrogen-Air Mixture in a Channel with Sudden Expansion and Polyurethane Foam

LES-FGM modelling of non-premixed auto-igniting turbulent hydrogen flames including preferential diffusion