Abstract:Propagation of premixed flames in narrow channels is investigated by means of extensive numerical simulations of a complete system of combustion and hydrodynamic equations, incorporating transport properties (thermal conduction, diffusion and viscosity) and Arrhenius chemical kinetics. The system includes mass conservation and Navier–Stokes equations as well as those for the energy and species balance. A flame propagates from the closed end of a channel to the open one. An initially planar flame front gets corrugated due to wall friction and thereby accelerates. It is shown that a flame exhibits an exponential state of acceleration only when the thermal expansion coefficient Θ exceeds a certain critical value Θ>Θc. The quantity Θc is tabulated as a function of the Reynolds number related to the flame propagation, Re, being Θc≈6 for Re=5∼20. The major flame characteristics such as the flame propagation speed and acceleration rate are scrutinized. It is demonstrated that the acceleration promotes with Θ but weakens with Re. In this respect, the present computational results support the theoretical prediction of Bychkov et al. Physical Review E 72 (2005) 046307 in a wide range of Θ and Re. While very good quantitative and qualitative agreement between numerical and theoretical results is found for realistically large thermal expansion, Θ⩾8, agreement deteriorates with decreasing Θ. Specifically, while the theory and modeling do not quantitatively agree for Θc<Θ<8, they nevertheless demonstrate a qualitative resemblance (the exponential state of acceleration). Finally, no exponential acceleration at Θ<Θc denotes that the theory completely breaks in that case, but this fits other works in the field and thereby allows reconciling various formulations on the flame acceleration.

Flame Front Dynamics in Flow of Hydrogen-Air Mixture in a Channel with Sudden Expansion and Polyurethane Foam

Influence of polyurethane foam on flame front propagation of hydrogen-air and acetylene-air mixtures in an open channel

The effect of porous coating on the flame acceleration in hydrogen–air mixture

Flame kinetic behavior of premixed hydrogen-air explosion in an obstructed channel

Effects of polyurethane foam on the detonation propagation in stoichiometric hydrogen-air mixture

Experimental studies of combustion processes of stratified and uniform hydrogen-air mixtures

Premixed Flame Oscillations in Obstructed Channels with Both Ends Open

The flow field behaviours of under-expansion jet flame in premixed hydrogen/air explosion venting

Analysis of combustion models of hydrogen-air mixtures using ANSYS FLUENT

Experimental study on the propagation characteristics of hydrogen/methane/air premixed flames in a narrow channel

Flame Acceleration in Hydrogen/Air Mixtures with Concentration Gradients

Effect of thermal expansion on flame propagation in channels with nonslip walls

Unsteady Regimes of Hydrogen Ignition and Flame Stabilization in a Channel

Sudden acceleration of flames in open channels driven by hydraulic resistance

Various regimes of premixed flame propagation in obstructed channels with both extremes open

Experimental study on combustion and explosion characteristics of hydrogen-air premixed gas in rectangular channels with large aspect ratio

Exceptional Performance of Flame-Retardant Polyurethane Foam: The Suppression Effect on Explosion Pressure and Flame Propagation of Methane-Air Premixed Gas

Self-ignition and Flow Characteristics of Pressurized Hydrogen in Y-shaped Tubes

Development of a hydrogen-air flame in a vertical channel with a horizontal diaphragm

Evolution of detonation wave and parameters of its attenuation when passing along a porous coating

Hydrogen-air explosion with concentration gradients in a cubic enclosure