Abstract:The strategy of heterogeneous-structured (HGS) high manganese steels was designed by asymmetrical-rolling (AR) with annealing to obtain superior mechanical performance for cryogenic applications. The grain size hierarchy can be modified by adjusting the annealing temperature based on the growth rate of recrystallized grains. Compared with the AR-740 sample, which is dominated by a large number fraction (∼72.51%) of fine-grained (FG) zone, the AR-630 specimen consisted of larger fractions of ultrafine-grains (UFG) and sub-fine-grains (SFG) not only shows significant yield strength (YS) and ultimate tensile strength (UTS) increments to ∼983 MPa and ∼1330 MPa, respectively, but also improved tensile ductility and impact toughness value to ∼64.9% and ∼183 J‧cm−2 at liquid nitrogen temperature (LNT), respectively. The difference in YS mainly originates from the different grain boundary strengthening degrees. Moreover, the ductility enhancement can be attributed to the different evolutions of deformed substructures and strain partitioning between heterogeneous domains. On one hand, the localized stress partitioned in the UFG and SFG zones of the AR-630 sample leads to the generation of deformation twins and geometrical necessary dislocations (GNDs) in all scales of grain, thus contributing to sustainable high back stress over the whole deformation stage. In contrast, the strain hardening of the AR-740 sample is dominated by the dislocation and twin hardening of FG zones with a homogeneous strain state. More importantly, the exceptional cryogenic toughness can be attributed to the following aspects: i) ductile fracture mode induced by twinning-induced plasticity (TWIP) effect generated by high stacking fault energy (SFE); ii) a more heterogeneous strain partitioning, which can alleviate the strain concentration in the weak FG zones, and also induce more nano-twins in the UFGs and SFGs to impede the crack propagation. The hierarchy modification is of great significance for the practical application of HGS to improve the cryogenic-temperature mechanical performance.

Exceptional cryogenic-to-ambient impact toughness of a low carbon micro-alloyed steel with a multi-heterogeneous structure

Cryogenic Toughness in a Low-Cost Austenitic Steel

Impact toughness and fracture behaviour of a lamellar structural Fe–Mn–Al–C cryogenic steel

Hierarchy modification induced exceptional cryogenic strength, ductility and toughness combinations in an asymmetrical-rolled heterogeneous-grained high manganese steel

Deformation microstructures as well as strengthening and toughening mechanisms of low-density high Mn steels for cryogenic applications

Tailoring Low‐Alloyed Cryogenic Steel Strong and Tough Introduces Fine‐Grained Equiaxed Ferrite by Intercritical Subquenching

Crystallography of Transformation Products with Different Cooling Rates in Low-Carbon Alloy Steel and Its Effect on Low-Temperature Toughness Uniformity of Heavy Plates

Tailoring the Microstructure to Enhance the Cryogenic Mechanical Properties of a Fe–34.5mn–0.04c Steel

Making low-alloyed steel strong and tough by designing a dual-phase layered structure

The combination of strength and cryogenic impact toughness in low carbon 5Mn–5Ni steel

Enhancing the cryogenic impact toughness of ferritic steel by multi-type and fine-microstructure design

Temperature dependence of the deformation behavior and mechanical properties of a Fe–Mn–Al–C low-density steel for cryogenic application

Study of Cryogenic Treatment on the Microstructure and Mechanical Properties of Marine 10Ni5CrMoV Steel

Precipitation and heterogeneous strengthened CoCrNi-based medium entropy alloy with excellent strength-ductility combination from room to cryogenic temperatures

Precipitation behavior of carbides and cryogenic toughness in heat-affected zone of high-Mn twinning-induced plasticity steel welded joint

Influence of banded ε-martensite and deformation twin on cryogenic toughness of Fe-Mn-xAl-C steel

High strength-toughness combination of a low-carbon medium-manganese steel plate with laminated microstructure and retained austenite

A cryogenic ultra-strong and ductile steel induced by stable nanoscale dual-phase structure

Microstructures and impact toughness of low-alloy high-carbon steel austempered at low temperature

Effect of grain size and segregation on the cryogenic toughness mechanism in heat-affected zone of high manganese steel

On the Role of Chemically Heterogeneous Austenite in Cryogenic Toughness of Maraging Steels Manufactured Via Laser Powder Bed Fusion