Abstract:Journal of Thermoplastic Composite Materials, Ahead of Print. Ongoing research in additive manufacturing towards structural and industrial application has led to the use of commingled roving as a manufacturing feedstock for printing high fiber volume fraction composites. The prospects of using this technology for high performance applications necessitates the need for a comprehensive experimental investigation into the effects of processing parameters on the quality of an additively manufactured composite printed from commingled roving feedstock. In this work, transverse flexure and void fraction matrix pyrolysis testing are both performed to evaluate composite quality. The transverse flexure test is a testing approach that evaluates the quality of the interfacial fiber-matrix bond while the void fraction test estimates the void content in the printed composite. A full observational study consisting of 27 different test combinations is done to investigate the effects of three different process parameters namely, temperature, pressure, and print speed across three different levels. Composite samples were made from commingled roving of E-glass and amorphous PET using an in-house built continuous fiber composite digital manufacturing system. Least squares regression analysis is performed to study the main, interaction and quadratic effects of process parameters. A statistical regression model having an R2 adjusted value of 80.1% is generated from the transverse flexure study, which is used to explain main and interaction effects and also predict performance. Response surface plots are also generated and are used to optimize process parameters which can subsequently be of help in scaling up composite manufacturing. Results show that all three process parameters are highly statistically significant at the 0.01 level of significance. Pressure * Temperature and Pressure * Printspeed are significant interaction terms. Pressure plays a weightier role when print speed is increased or temperature is decreased as it closes more voids that would ordinarily have been introduced because of drop in polymer melt viscosity. Micrographic analysis is also performed.

Comparative characterization of the viscoelastic properties of additive manufacturing polymers

Influence of Thermoviscoelastic Properties and Loading Conditions on the Recovery Performance of Shape Memory Polymers

Characterizing Dissipative Elastic Metamaterials Produced by Additive Manufacturing

Evolution of microstructure and thermo‐mechanical attributes of fiber reinforced polyamide during fused deposition modeling 3D printing: A comprehensive characterization study

Investigation into Thermomechanical Response of Polymer Composite Materials Produced through Additive Manufacturing Technologies

Additive Manufacturing of Composite Polymers: Thermomechanical FEA and Experimental Study

The thermal properties of FDM printed polymeric materials: A review

Dynamic Mechanical Analysis of 3D Printed PETG Material

Experimental and statistical study on the effect of process parameters on the quality of continuous fiber composites made via additive manufacturing

Effect of Temperature History During Additive Manufacturing on Crystalline Morphology of Polyether Ether Ketone

Modelling of the temperature and residual stress fields during 3D printing of polymer composites

Thermo-mechanical properties of digitally-printed elastomeric polyurethane: Experimental characterization and constitutive modelling using a nonlinear temperature-strain coupled scaling strategy

Thermal, Tensile and Fatigue Behaviors of the PA6, Short Carbon Fiber-Reinforced PA6, and Continuous Glass Fiber-Reinforced PA6 Materials in Fused Filament Fabrication (FFF)

Elasto-Plastic Mechanical Modeling of Fused Deposition 3D Printing Materials

An experimental and theoretical investigation on the hyper-viscoelasticity of polyamide 12 produced by selective laser sintering

A viscoelastic constitutive model for shape memory polymer composites: Micromechanical modeling, numerical implementation and application in 4D printing

A Mechanical Performance Study of Dual Cured Thermoset Resin Systems 3D-Printed with Continuous Carbon Fiber Reinforcement

Numerical and Experimental Investigations of Polymer Viscoelastic Materials Obtained by 3D Printing

Rate-dependent energy dissipation of graded viscoelastic structures fabricated by grayscale vat photopolymerization

A Photo-Chemo-Mechanical Coupling Constitutive Model for Photopolymerization-based 3D Printing Hydrogels

Process–Structure–Properties in Polymer Additive Manufacturing via Material Extrusion: A Review