Abstract:Investigation route of 3D‐printed G‐Polymer. The ever‐increasing demand for additive manufacturing (AM) is driven by the technology's rapid prototyping and flexible manufacturing benefits. Among the various AM techniques, fused filament fabrication (FFF) is one of the most commonly used techniques, in which thermoplastic polymer filaments are deposited layer by layer to create the final part. This technique has been used extensively in various sectors. However, new materials have yet to be developed for use in FFF. This research aims to introduce a new biodegradable highly amorphous polyvinyl alcohol (HAVOH), commercially known as G‐Polymer (GP), into the scope of FFF, to propose a process window for the fabrication of parts with enhanced mechanical properties and to discover the process‐structure–property relationship for this material. This study investigates the effect of five key parameters in GP FFF, including raster angle, number of contours, nozzle temperature, build platform temperature, and print speed. The results of the chemical, thermal, and thermo‐mechanical analysis of the filaments before and after hot extrusion of the 3D printer nozzle showed a significant increase in the mechanical properties of the hot‐extruded filaments. In addition, the mechanical characterization of 3D printed parts showed that increasing the number of contours can improve the mechanical properties of parts, while the raster angle can have a complex effect. The mechanical properties of the parts are also improved by reducing the temperature of the nozzle and the build platform. Printing speed, as an essential parameter in AM, was related to the previously mentioned parameters, and the results showed that increasing the printing speed could improve the UTS and Young's modulus of the 3D printed part. Highlights A novel biodegradable polymer (HAVOH) was introduced into the scope of FFF. The hot extruded G‐Polymer filament from the nozzle showed improved mechanical properties. 180°C nozzle and room temperature platform resulted in improved mechanical properties. 3D printed parts with +45°/−45° raster angle show improved mechanical properties 110 mm/s print speed results in higher mechanical strength than 70 mm/s print speed.

The thermal properties of FDM printed polymeric materials: A review

Evolution of microstructure and thermo‐mechanical attributes of fiber reinforced polyamide during fused deposition modeling 3D printing: A comprehensive characterization study

3D Printed Fibre-Reinforced Polymer Composites — Review of the Fused Deposition Modeling Process and Mechanical Performance of Products

Review on Thermodynamic Properties of Plastic by Fused Deposition Modeling

FDM-Based 3D Printing of Polymer and Associated Composite: A Review on Mechanical Properties, Defects and Treatments

Fused Deposition Modelling (FDM) of Thermoplastic-Based Filaments: Process and Rheological Properties-An Overview

A critical review on the fused deposition modeling of thermoplastic polymer composites

3D/4D Printing of Polymers: Fused Deposition Modelling (FDM), Selective Laser Sintering (SLS), and Stereolithography (SLA)

Thermally conductive polymer nanocomposites for filament-based additive manufacturing

Effects of Printing Temperature and Filling Percentage on the Mechanical Behavior of Fused Deposition Molding Technology Components for 3D Printing

Fused deposition modeling-based additive manufacturing (3D printing): techniques for polymer material systems

Process–Structure–Properties in Polymer Additive Manufacturing via Material Extrusion: A Review

Improving the Impact Strength and Heat Resistance of 3D Printed Models: Structure, Property, and Processing Correlationships during Fused Deposition Modeling (FDM) of Poly(Lactic Acid)

Failures and Flaws in Fused Deposition Modeling (FDM) Additively Manufactured Polymers and Composites

A review of the performance of polymer parts printed on fused deposition modelling under cyclic loading

Effect of Temperature History During Additive Manufacturing on Crystalline Morphology of Polyether Ether Ketone

Effect of process parameters on additively manufactured parts using FDM process & material selection: A review

The process‐structure–property relationship of 3D printed G‐Polymer using fused filament fabrication technique

Influence of Fused Deposition Modelling Nozzle Temperature on the Rheology and Mechanical Properties of 3D Printed β-Tricalcium Phosphate (TCP)/Polylactic Acid (PLA) Composite

Effects of Fused Deposition Modeling Process Parameters on Tensile, Dynamic Mechanical Properties of 3D Printed Polylactic Acid Materials

A comprehensive review on fused deposition modelling of polylactic acid