Abstract:Titanium matrix composites (TMC) have potential applications in the aerospace industry because of their excellent performance. The comprehensive performance of TMC mainly depends on the matrix, reinforcement and interface characteristics. Hence, this study discussed the knowledge of microstructure-property relationships in detail. Crack-free high-mass-proportion TiCp/Ti6Al4Vcomposites were successfully prepared by directed energy deposition (DED). As the TiCp mass fraction increasing from 0 to 50%, the quantity of primary TiC and unmelted TiC (UMT) increased. Meanwhile, the refined α-Ti in the composites had a relatively weak texture. In addition, the interface between primary TiC and α-Ti was a semi-coherent interface, exhibiting a <math>112-0</math> α-Ti // [110]TiC, <math>1-100</math> α-Ti // <math>1-11</math> TiC orientation relationship, which facilitated the heterogeneous nucleation of Ti and improved bonding of primary TiC with the matrix. With the increase in microhardness taking the form of a cubic function, the wear mechanism was found to transform from abrasive wear to slight delamination wear. Due to the fact that both UMT and primary TiC bonded well with Ti64 matrix, they shared partial friction to protect matrix from severe abrasion, resulting in an excellent wear resistance of composites. Moreover, the thermal conductivity of 50% TiCp/Ti6Al4V was 9.063 <math>W∙m-1∙K-1</math>, which was nearly 26.5% higher than that of Ti6Al4V. Owing to the premature cracking of brittle UMT and dendritic TiC, the tensile strength and elongation of the composite with 50% TiCp were 515.5 MPa and 1.83%, which decreased by 45.8% and 78.8%, respectively. Adding a high proportion of TiCp can significantly improve the hardness and wear resistance of TMC, whereas it is detrimental to the tensile performance of TMC. The study have significant implications for the design of novel TMC, particularly for the aerospace industrial applications.

A novel way to fabricate high elastic modulus and high strength of TiC reinforced aluminum matrix composite

Integrating Experimental and Computational Analyses for Mechanical Characterization of Titanium Carbide/Aluminum Metal Matrix Composites

Simultaneous Improvement in Strength and Ductility of TC4 Matrix Composites Reinforced with Ti1400 Alloy and In Situ-Synthesized TiC

Fabrication, microstructure and mechanical properties of TiAl matrix composite reinforced by submicro/nano-Ti 2 AlC

Influence of TiC Particles on Mechanical and Tribological Characteristics of Advanced Aluminium Matrix Composites Fabricated through Ultrasonic-Assisted Stir Casting

Preparation, Microstructure and Mechanical Properties of In-Situ TiC/Al–Si–Fe Aluminum Matrix Composites

Study of mechanical properties and wear resistance of nanostructured Al 1100/TiO2 nanocomposite processed by accumulative roll bonding

Significantly improved strength of the TiC/TA19 composites via interface and dislocation strengthening

Effect of Increasing the Strength of Aluminum Matrix Nanocomposites Reinforced with Microadditions of Multiwalled Carbon Nanotubes Coated with TiC Nanoparticles

Preparation and mechanical properties of titanium alloy matrix composites reinforced by Ti3AlC and TiC ceramic particulates

Effect of Secondary Processing and Nanoscale Reinforcement on the Mechanical Properties of Al-TiC Composites

Preparation of in situ TiC@TiN core–shell and Ti2N–Al4C3 nanoparticles and their effects on Al–Zn–Mg–Cu alloy

Microstructure, wettability, and mechanical properties of ADC12 alloy reinforced with TiO2-coated carbon nanotubes

Microstructure characterization and enhanced mechanical properties of quasi-continuous network structured Ti3AlC2-Al3Ti/2024Al composite

Microstructure and Mechanical Properties of Dual Scaled NbC/Ti2AlC Reinforced Titanium–Aluminum Composite

R-curve Behavior of TiC Particle Reinforced Al2O3 Composites

In-situ TiC/Ti composites based on Ti 2 AlC–Ti system: Reaction process, microstructure, and mechanical properties

Microstructure and tribological behavior of Al-TiC composite strips fabricated by a multi-step densification method

High-mass-proportion TiCp/Ti6Al4V titanium matrix composites prepared by directed energy deposition

Construction of Three-Dimensional Network Morphology Titanium Matrix Composites Via Adding Nano B4C: As-built and Heat-Treated Scenarios

Constructing micro-network of Ti 2 Cu and in-situ formed TiC phases in titanium composites as new strategy for significantly enhancing strength