Abstract:Major distresses such as rutting, fatigue, and thermal cracking are facing asphalt pavement structures due to continuous heavy traffic loading and climate change. The modification of asphalt binders (one of the main components of the asphalt paving mix) has the potential to mitigate distresses through using different additives. Polymer modified asphalt (PMA) binders showed a noticeable resistance to pavement distresses as reported in previous studies. The present study aims to evaluate the effect of polymer modification on the rheological properties of asphalt binders through laboratory tests. The polymers included styrene-butadiene-styrene (SBS) and epolene emulsifiable (EE2) types. The 60/70 binder was used as a control for comparison. The Mechanistic-Empirical Pavement Design Guide (MEPDG) was also utilized to simulate the effect of PMA binders on the rheological properties under different climatic conditions and structural capacities. Additionally, the MEPDG was further utilized to compare the effect of asphalt binders on rheological properties using four different binder input levels. Findings of the study showed that laboratory tests experienced varying outcomes regarding the most efficient asphalt binder by means of distresses resistance. However, the MEPDG evaluation showed that the overall ranking of asphalt binders positively impacting the rheological properties was as following: (1) 4.5% EE2 PMA, (2) 4% EE2 PMA, (3) 60/70 binder, (4) 5% SBS PMA, and (5) 4% SBS PMA binders. Furthermore, statistical analysis illustrated that the effect of using different binder input levels on the performance of pavement varied relatively to the evaluated distresses. The analysis showed that using different binder input levels would affect, to a certain extent, the asphalt binder influence on rheological properties only when evaluating rutting and fatigue distresses. Therefore, it is recommended that precise asphalt binder inputs, that is, shear complex modulus (G*) and phase angle (δ) are used when designing pavement structures in regions with hot and mild climate conditions.

Short- and long-term mechanical performances of damaged porous asphalt mixture treated with asphalt emulsion

Mechanical Performance Of Warm-Mixed Porous Asphalt Mixture With Steel Slag And Crumb-Rubber-Sbs Modified Bitumen For Seasonal Frozen Regions

Effects of polymer modified asphalt emulsion (PMAE) on pavement reflective cracking performance

Recovery efficiency of the damaged porous asphalt mixture with emulsion-based surface treatment: Material optimization and performance verification

Comparative Analysis of Rheological and Microscopic Performance of SBS Modified Asphalt Based on Field Aging and Laboratory Aging

Penetration Mechanism of the Emulsion-Based Rejuvenator in Damaged Porous Asphalt Mixture: Microstructure Characterization and 3D Reconstruction

Diffusion characteristics of surface treatment emulsion in aged asphalt mortar of porous asphalt mixture through SEM/EDS analysis

Optimization Design of Asphalt Emulsion with Rejuvenator Towards a Uniform Distribution Inside the Damaged Porous Asphalt Mixture for a Better Ravelling Resistance

Experimental Investigation of Moisture Sensitivity and Damage Evolution of Porous Asphalt Mixtures

Long-Term Mechanical Deterioration Trends and Mechanisms of SBS-Modified Asphalt Mixtures

Study of the Molecular Components and Rheological Properties of Asphalt after Long-Term Aging under the Action of Moisture

Investigation on the Preparation and Performances of Epoxy-Modified Asphalt Binder and Its Mixtures

Rheological properties and aging resistance of self‐healing polyurea elastomer modified asphalt

Proposal for a New Method for Evaluating Polymer-Modified Bitumen Fatigue and Self-Restoration Performances Considering the Whole Damage Characteristic Curve

Study on fatigue performance of asphalt mixture in service life based on accelerated loading test

Experimental Study on Road Performance of Cold Recycled Asphalt Mixture with Emulsified Asphalt

Mechanistic-empirical evaluation of specific polymer-modified asphalt binders effect on the rheological performance

Rheological Behaviors and Damage Mechanism of Asphalt Binder under the Erosion of Dynamic Pore Water Pressure Environment

Study on the performance and mechanism of physicochemically modified asphalt based on spatial crosslinking by the crumb rubber and polyurethane precursor

In-field Aging Process of High Content SBS Modified Asphalt in Porous Pavement

A Novel High-Performance Warm-Mix Porous Asphalt Prepared with Polyurethane Prepolymer: Strength Development Mechanism and Mechanical and Functional Performance