Abstract:As soft active materials, shape-memory polymers (SMPs) and liquid crystal elastomers (LCEs) have attracted considerable research interest due to their potential applications in various areas. SMPs refer to polymeric materials that can return to their permanent shape in response to external stimuli, such as heat, light, and solvent. In this sense, LCEs can exhibit intrinsic shape-memory behaviors since LCEs can switch between two shapes with temperature change due to the order-disorder transition of liquid crystals. In this work, we fabricate both the polydomain and monodomain nematic LCEs through direct ink writing 3D printing. With increasing the temperature of the substrates, the printed LCEs change from the monodomain state to the polydomain state. For polydomain LCEs, a reversible shape change can occur upon constant loading, while the monodomain can switch the shape with temperature in the stress-free state. This two-way shape-memory behavior is caused by the nematic-isotropic phase transition. We further show that the printed LCEs exhibit a good one-way shape-memory effect due to glass transition. The shape recovery region increases with the programming temperature, which is a typical temperature memory effect. Finally, it is demonstrated that complex shape-memory performance can be designed by combining one-way and two-way shape-memory effects. Specifically, for the monodomain LCEs, with increasing temperature, the programmed shape first recovers, and a second shape change can further occur due to the nematic-isotropic transition.

Harnessing the Power of Carbon Fiber Reinforced Liquid Crystal Elastomer Composites for High-Performance Aerospace Materials: A Comprehensive Investigation on Reversible Transformation and Shape Memory Deformation

Carbon fiber reinforced liquid crystalline elastomer composites: a dual exploration in strength augmentation and transformation flexibility through 4D printing

Carbon Fiber Reinforced Shape Memory Epoxy Composites with Superior Mechanical Performances

Shape Memory Behaviors of 3D Printed Liquid Crystal Elastomers

Mechanical and Shape Recovery Properties of Shape Memory Polymer Composite Embedded with Cup-Stacked Carbon Nanotubes

Fiber-reinforced liquid crystalline elastomer composite actuators with multi-stimulus response properties and multi-directional morphing capabilities

A multifunctional shape-morphing elastomer with liquid metal inclusions

Thermal, mechanical and shape fixity behaviors of shape memory cyanate under gamma-ray radiation

Two-step Crosslinked Liquid-Crystalline Elastomer with Reversible Two-Way Shape Memory Characteristics

Thermal, mechanical and shape fixity behaviors of shape memory cyanate under γ-ray radiation

Structure-induced Intelligence of Liquid Crystal Elastomers.

Design and Characterization of Deformable Superstructures Based on Amine‐Acrylate Liquid Crystal Elastomers

Liquid crystal elastomer composites for soft actuators

An ultrahigh fatigue resistant liquid crystal elastomer-based material enabled by liquid metal

Highly Durable and Tough Liquid Crystal Elastomers

Ultra-thin carbon fiber reinforced carbon nanotubes modified epoxy composites with superior mechanical and electrical properties for the aerospace field

Liquid Crystal Elastomer-Liquid Metal Composite: Ultrafast, Untethered, and Programmable Actuation by Induction Heating

Enhanced Electrical Conductivity and Interlaminar Fracture Toughness of CF/EP Composites via Interleaving Conductive Thermoplastic Films

Liquid Crystal Elastomer – Liquid Metal Composite: Ultrafast, Untethered, And Programmable Actuation by Induction Heating

Permanent Shape Reconfiguration and Locally Reversible Actuation of a Carbon Nanotube/Ethylene Vinyl Acetate Copolymer Composite by Constructing a Dynamic Cross-Linked Network

Unidirectional carbon fiber reinforced cyanate‐based shape polymer composite with variable stiffness