Abstract:Electrocoagulation technology, due to its simplicity and ease of operation, is often considered for treating arsenic-contaminated groundwater. However, challenges such as anode wear have hindered its development and application. This study aims to develop a siderite-filled anode electrocoagulation system for efficient removal of As( III ) and investigate its effectiveness. The impact of operational parameters on the removal rate of As( III ) was analyzed through single-factor tests, and the stability and superiority of the device were evaluated. The response surface methodology was employed to analyze the interactions between various factors and determine the optimal operational parameters by integrating data from these tests. Under conditions where the removal rate of As reached 99.3 ± 0.37%, with an initial concentration of As( III ) at 400 μg L −1 , current intensity at 30 mA, initial solution pH value at 7, and Na 2 SO 4 concentration at 10 mM. The flocculant used was subjected to characterization analysis to examine its structure, morphology, and elemental composition under these optimal operational parameters. The oxidation pathway for As( III ) within this system relies on integrated results from direct electrolysis as well as ̇O 2 − , ̇OH, and Fe( IV ) mediated oxidation processes. The elimination of arsenic encompasses two fundamental mechanisms: firstly, the direct adsorption of As( III ) by highly adsorbent flocculants like γ-FeOOH and magnetite (Fe 3 O 4 ); secondly, the oxidation of As( III ) into As( V ), followed by its reaction with siderite or other compounds to generate a dual coordination complex or iron arsenate, thus expediting its eradication. The anodic electrocoagulation system employing siderite as a filler exhibits remarkable efficiency and cost-effectiveness, while ensuring exceptional stability, thereby providing robust theoretical underpinnings for the application of electrocoagulation technology in arsenic removal.

Phosphate removal from aqueous solution by electrochemical coupling siderite packed column

Phosphorus Removal by in Situ Generated Fe(II): Efficacy, Kinetics and Mechanism.

Phosphate Removal from Industrial Wastewater Through In-Situ Fe2+ Oxidation Induced Homogenous Precipitation: Different Oxidation Approaches at Wide-Ranged Ph

Effects of Fe(II)/P Ratio and Ph on Phosphorus Removal by Ferrous Salt and Approach to Mechanisms

In-situ production of iron flocculation and reactive oxygen species by electrochemically decomposing siderite: An innovative Fe-EC route to remove trivalent arsenic

Enhanced recovery of phosphorus from hypophosphite-laden wastewater via field-induced electro-Fenton coupled with anodic oxidation

High-efficiency removal of As(III) from groundwater using siderite as the iron source in the electrocoagulation process

Promoted iron corrosion and enhanced phosphate removal by micro-electric field driven zero-valent iron

Phosphate Removal from Water Using Novel Fe2+-KMnO4 Process: Significant Role of in Situ–Formed Fe(III)

Phosphate-Induced Acidic Microenvironment for Improved Contaminant Removal during FeS Oxygenation.

Phosphorus Removal Using Ferric–calcium Complex As Precipitant: Parameters Optimization and Phosphorus-Recycling Potential

Cooperation of ferrous ions and hydrated ferric oxide for advanced phosphate removal over a wide pH range: Mechanism and kinetics

Calcium Carbonate Packed Electrochemical Precipitation Column: New Concept of Phosphate Removal and Recovery

Removal of Phosphate from Wastewater by Fe-C Micro-Electrolysis: Application of a Novel Integrated Fe/C Aggregate.

Preparation of FeOOH Supported by Melamine Sponge and Its Application for Efficient Phosphate Removal

Removal of lead complexes by ferrous phosphate and iron phosphate: Unexpected favorable role of ferrous ions

Anoxic iron electrocoagulation automatically modulates dissolved oxygen and pH for fast reductive decomplexation and precipitation of Cu(II)-EDTA: The critical role of dissolved Fe(II)

Importance of iron complexation and floc formation towards phosphonate removal with Fe-electrocoagulation

Enhanced phosphate pollutant removal from liquid via adsorption flotation strategy: Synergic effect of Fe(III)-fulvic acid carrier and CTAB

Fe electrocoagulation technology for effective removal of molybdate from water: Main influencing factors, response surface optimization, and mechanistic analysis

Phosphorus removal by iron–carbon microelectrolysis: A new way to achieve phosphorus recovery