Abstract:Phosphorus removal and recovery from wastewater is crucial for environmental pollution control and sustainable phosphorus fertilizer production. Electrochemical technologies are promising, but disadvantages like high energy consumption remain. Here, we improved the electrochemical system's performance by placing carbon felt in front of the cathode at a distance of 3 mm with a current density as low as 1 A/m2, which separated the reactor into two parts: near the cathode area and bulk solution. The phosphorus removal near the cathode can reach 75 % in 1 h, while it takes 8 h for the bulk solution to achieve 75 % removal efficiency. The main reason for the enhancement was the retention of OH− ions between the cathode and carbon felt with enriched calcium ions, providing an appropriate environment for calcium phosphate precipitation. The functional groups on the carbon felt surface were another reason for the retention of OH− ions. Furthermore, our results show that the carbon felt system has considerable stability under different mass transfer efficiencies. By adjusting the stirring rate, we could control the proportion of precipitation on the carbon felt or cathode, thereby reducing the scaling on the cathode and avoiding significantly reduced removal efficiency. A long-term continuous flow experiment also illustrated this. Interestingly, we observed that the phosphorus removal had a specific correlation with pH and fit an empirical formula. Therefore, we could estimate the removal efficiency by simply measuring the effluent pH of the solution after treatment. In treating real phosphorus-rich wastewater, the carbon felt system removed 63 %–87 % of 1500 mg/L P after 8 h to 48 h treatment at 20 A/m2, respectively, resulting in lower energy consumption (31 kWh/kg P, 8 h) compared to the system without carbon felt (48 kWh/kg P, 8 h). This study provides a simple yet efficient method for enhancing electrochemical phosphorus recovery.

Removal of Phosphate from Wastewater by Fe-C Micro-Electrolysis: Application of a Novel Integrated Fe/C Aggregate.

Enhanced electrochemically mediated calcium phosphate precipitation for phosphorus recovery simply by carbon felt barrier cathode

Enhanced phosphate pollutant removal from liquid via adsorption flotation strategy: Synergic effect of Fe(III)-fulvic acid carrier and CTAB

Phosphorus Removal Using Ferric–calcium Complex As Precipitant: Parameters Optimization and Phosphorus-Recycling Potential

Phosphorus removal by iron–carbon microelectrolysis: A new way to achieve phosphorus recovery

Effective phosphate removal for advanced water treatment using low energy, migration electric-field assisted electrocoagulation.

Achieved advanced wastewater phosphate removal via improved ionic interference resistance in a migration-electric-field assisted electrocoagulation (MEAEC) system with modified-biochar pseudocapacitor electrode

Phosphate Removal Efficiency and Life Cycle Assessment of Different Anode Materials in Electrocoagulation Treatment of Wastewater

Importance of iron complexation and floc formation towards phosphonate removal with Fe-electrocoagulation

Development of a Polyaluminum Ferric Titanium Chloride for Phosphorous Removal in Water

Phosphorus Removal from Wastewater Using Electric Arc Furnace Slag Aggregate

Highly stable removal of low concentration phosphorus by mechanically activated FeCO 3 : In situ synergistic mechanisms

A novel calcium peroxide/attapulgite-Fe(II) process for high concentration phosphate removal and recovery: Efficiency and mechanism

Utilization and value-adding of waste: Fabrication of porous material from chitosan for phosphate capture and energy storage

Improved Electrocoagulation Reactor for Rapid Removal of Phosphate from Wastewater

Calcium Carbonate Packed Electrochemical Precipitation Column: New Concept of Phosphate Removal and Recovery

Phosphate Removal from Industrial Wastewater Through In-Situ Fe2+ Oxidation Induced Homogenous Precipitation: Different Oxidation Approaches at Wide-Ranged Ph

A Study of Ferric-Carbon Micro-Electrolysis Process to Enhance Nitrogen and Phosphorus Removal Efficiency in Subsurface Flow Constructed Wetlands

Recycle of Fe/Ca-rich fly ash in preparation of modified porous ceramsite for selective and efficient phosphate recovery

Fabrication of a Reusable Polymer-Based Cerium Hydroxide Nanocomposite with High Stability for Preferable Phosphate Removal

Removal of phosphate in secondary effluent from municipal wastewater treatment plant by iron and aluminum electrocoagulation: Efficiency and mechanism