A Study of Ferric-Carbon Micro-Electrolysis Process to Enhance Nitrogen and Phosphorus Removal Efficiency in Subsurface Flow Constructed Wetlands

Youhao Shen,Linlan Zhuang,Jian Zhang,Jinlin Fan,Ting Yang,Shuo Sun
DOI: https://doi.org/10.1016/j.cej.2018.11.152
IF: 15.1
2019-01-01
Chemical Engineering Journal
Abstract:The application of subsurface-flow constructed wetlands (SSFCWs) has been restricted by the low nitrogen and phosphorus removal efficiency for several decades. Ferric-Carbon Micro-Electrolysis (Fe/C-M/E) system has gained increasing attention due to its high redox capacity and the function of adsorption and flocculation. Therefore, to apply Fe/C-M/E process in SSFCWs is a promising approach to enhance the removal efficiency of nitrogen and phosphorus of domestic sewage. In this study, a micro-electrolysis-intensified subsurface-flow constructed wetlands (ME-SSFCWs) including iron scraps and biochar were operated to investigate the effect of micro-electrolysis-substrate on nitrogen and phosphorus removal performance together with the related kinetics and possible pathways. The results showed that the removal efficiency of NO3--N, total nitrogen (TN) and phosphorus by ME-SSFCWs were 99.54 +/- 0.80%, 81.45 +/- 1.27% and 93.63 +/- 5.30d%, respectively, for a 3-day hydraulic retention time (HRT), which were much higher than that of the ordinary SSFCWs (NO3--N: 37%; TN: 38%; TP: 39%) and biochar-added SSFCWs (NO3--N: 57%; TN: 54%; TP: 21%). These results indicated that micro-electrolysis could supply electrons for the denitrification. Besides, the improvement of phosphorus removal efficiency was due to the galvanic corrosion of numerous micro-scale sacrificial anodes which caused precipitation, adsorption and flocculation of phosphorus. Microbial analysis via real-time quantitative PCR Detecting System (qPCR) revealed that associated microbial abundance could dramatically increase due to the addition of Fe/C-M/E material substrate.
What problem does this paper attempt to address?