Abstract:On the basis of previous experimental studies of two-phase flow condensation heat transfer for R134a inside the horizontal micro-fin tubes, a theoretically analysis of heat transfer characteristic combining both heat transfer mechanism and flow mechanism is discussed by the experimental data of heat transfer coefficient and pressure drop, to further clarify the influence of experimental condition and tube structure on heat transfer characteristics under the special working condition. Two performance factors, enhancement factor (EF) and penalty factor (PF), are introduced to quantitatively compare the effect of micro-fin on the heat transfer coefficient and the pressure drop between enhance tube and smooth tube. Meanwhile, the comprehensive factor, CHF, is applied to evaluate the comprehensive performance of heat transfer tube. It was found that enhancement factor (EF) and penalty factor (PF) both increase with increasing mass flux and fin helical angle, and decreasing saturation temperature, the comprehensive factor, CHF, is always greater than one and increases with increasing fin helical angle and mass flux, and decreasing saturation temperature. Moreover, based on the comparative analysis findings that some existing correlations of heat transfer characteristics underestimate most of the experimental data, and the experimental variable has great influences on the correlation prediction accuracy, such as mass flux, which is proportionate to the prediction deviation of correlation. Therefore, a new correlation was developed through analyzing quantitatively influencing mechanism of the experimental variable on the heat transfer characteristics, in a way that a two-phase frictional multiplier is defined firstly from the experimental data and then the forced convection heat transfer mechanism is redefined based on the comprehensive effect of various experimental variables. By the experimental data verification, the new correlation shows good prediction effect with the mean deviation of less than 5%.

New Friction Factor Correlation for Phase-Change Flow in Plate Heat Exchangers

A GENERAL CORRELATION FOR FRICTIONAL PRESSURE DROP OF FLOW BOILING IN PLATE HEAT EXCHANGERS

New Two-Phase Multiplier Model for Phase-Change Flows in Plate Heat Exchangers

Flow boiling pressure drop correlation in small to micro passages

Frictional Resistance Investigation of Sco2 and a Semi-Empirical Friction Factor Correlation Based on Wall-of-the-law

A Modified Correlation for Flow Boiling Heat Transfer in Plate Heat Exchangers

New Correlations for Two Phase Flow Pressure Drop in Homogeneous Flows Model

Evaluation of Two-Phase Frictional Pressure Drop Correlations Against Experimental Data

Evaluation of prediction models on frictional pressure drop for condensation flow in horizontal circular tubes

A New General Correlation for Frictional Pressure Drop During Condensation Inside Horizontal Micro-Fin Tubes

Evaluation of Frictional Pressure Drop Correlations During Flow Boiling of Refrigerants in Micro-Fin Tubes

Theoretical and Experimental Analyses of Two-Phase Flow Condensation Heat Transfer Inside the Horizontal Micro-Fin Tube

Frictional Pressure Drop During Flow Boiling in Micro-Fin Tubes: A New General Correlation

Experimental study on condensation friction pressure drop in rotating channels and proposal of new correlation

A simple friction pressure drop correlation for two-phase flow in pipes

Flow Boiling in Dimpled Plate Heat Exchangers with Different Geometric Parameters: Analysis of Asymmetric Channels

Experimental investigation of two-phase flow in Chevron-type compact plate heat exchangers: A Study on pressure drops and flow regimes visualization

Two-Phase Flow Heat Transfer In Micro-Fin Tubes

Numerical simulation of flow boiling heat transfer and pressure drop in a corrugated plate heat exchanger at low mass flux and vapor quality conditions

Single Phase And Two Phase Flow Characteristics And Heat Transfer In Micro-Fin Tubes

A Comprehensive Empirical Correlation for Finned Heat Exchangers with Parallel Plates Working in Oscillating Flow