Abstract:The synthesis of light olefins via carbon monoxide hydrogenation is effective means to resolve the increasing shortage of petroleum resources. We have previously reported the Fe 3C ultrafine particle catalyst prepared by laser pyrolysis method, while its industrialization is difficulty owing to its expensive cost. This paper reports a series iron based catalysts supported on activated char (AC) that were prepared from different iron sources (ferric citrate, ferric oxalate and ferric nitrate), different activated char (activated cocoanut char GH101 and activated nut char GH81) and different promoters. Carbon monoxide hydrogenation reaction was performed over the Fe/AC catalysts. It was found that the Fe/AC catalysts exhibit rather higher activity and selectivity for light olefins. XRD characterization shows that the bulk phase of fresh Fe Cu K/AC catalyst consists of α Fe, Fe 3O 4 and Cu 0. After the reaction of Fischer Tropsch synthesis, the bulk phase structure of the catalyst converted to α Fe, Fe 5C 2, Fe 7C 3, Cu 0 and K 2O. The bulk phase structure of Fe Mn K/AC catalyst is mainly (Fe,Mn)O mixed crystal. The α Fe, Fe x C y and (Fe,Mn)O from our experiment are similar to the active phases of the Fe/C catalyst prepared by laser pyrolysis. The performance of catalyst was characterized, the result shows that the Fe/AC catalysts originally prepared with ferric oxalate as iron source, with GH101 as supporter, and with Cu, Mn, Si and K as promoters generally exhibit high activity. The influence of different potassium salts on the Fe/AC catalysts was investigated. The result indicates that under the conditions of SV=600 h -1 , p =1 5 MPa and θ =320 ℃, the Fe Mn K 2CO 3/AC catalyst is the most effective catalyst with CO conversion up to 97 4% and C = 2～C = 4 selectivity up to 68 0%.

Preparation of Iron-Based Catalysts by Mechanical Solid-Phase Ball Milling and Their Applications in Cohydrogenation of Coal and Petrochemical Coking Residual Oil

Reactive ball-milling synthesis of Co-Fe bimetallic catalyst for efficient hydrogenation of carbon dioxide to value-added hydrocarbons

Mechanochemically-based three-way approach for the synthesis of K-doped Cu-Fe/ZnO-Al2O3 catalysts for converting CO2 to oxygenates

EFFECT OF IRON CATALYST ON PRODUCT COMPOSITION AND NATURE FOR COAL/OIL CO-PROCESSING

Nanocrystalline Iron–boron Catalysts for Low-Temperature CO Hydrogenation: Selective Liquid Fuel Production and Structure–activity Correlation

An Overview on Dynamic Phase Transformation and Surface Reconstruction of Iron Catalysts for Catalytic Hydrogenation of COx for Hydrocarbons

The catalytic properties of Fe78Si12B10 alloys prepared by ball milling

Iron Carbides: Control Synthesis and Catalytic Applications in COx Hydrogenation and Electrochemical HER.

An Introductive Study about CO 2 Hydrogenation into Hydrocarbons Using Iron Catalysts

Mechanistic Insight into Hydrocarbon Synthesis via CO2 Hydrogenation on χ-Fe5C2 Catalysts

A novel preparation strategy for an oil-soluble catalyst in slurry phase hydrocracking: Synergistic effect and electronic regulation of Fe on MoS 2

Effect of Precursors of Fe-Based Fischer-Tropsch Catalysts Supported on Expanded Graphite for CO<sub>2</sub> Hydrogenation

Preparation and Characterization of Fe/AC Catalysts for Synthesis of Light Olefins via Carbon Monoxide Hydrogenation

One-Pot Solvothermally Synthesized MFe2O4 (M=Fe, Mn, Co, Ni) Microspheres as Catalysts for Fischer-Tropsch to Olefins

Preparation of Co-Mo/γ-Al2O3 catalyst and the catalytic hydrogenation effects on coal-related model compounds

An Efficient Catalyst Derived from Carboxylated Lignin-Anchored Iron Nanoparticle Compounds for Carbon Monoxide Hydrogenation Application

Superparamagnetic Iron Oxide Nanoparticles on ZrO2 as Catalysts for CO2 Hydrogenation to Lower Olefins

Process integration of KOH/diatomite preparation and cyclopentanone self-condensation via ball-milling method

Preparation adjacent Ni-Co bimetallic nano catalyst for dry reforming of methane

Mechanochemical Redox Synthesis of Interstitial Mesoporous CoxFe1‐xOy Catalyst for CO2 Hydrogenation

K-PtCo/Al2O3 Via Ball Milling As an Efficient Catalyst for Preferential Oxidation of CO Towards Hydrogen Purification