Abstract:Mixed oxides of uranium and plutonium U 1-y Pu y O 2-x are currently studied as reference fuel for Sodium-cooled Fast Reactors (SFRs). To predict the margin to fuel melting, an accurate description of both solidus and liquidus temperatures of these materials is crucial. In this work, after a critical review of the literature data, the parameters of the liquid phase of the CALPHAD models of the Pu–O and U–Pu–O systems are reassessed based on the model of Guéneau et al.. A good agreement between the calculated and selected experimental data is obtained. Using this model, the melting behaviour of U 1-y Pu y O 2±x oxides is then studied as a function of plutonium content and oxygen stoichiometry. The congruent melting for the mixed oxides is found to be shifted towards low O/M ratios compared to the end-members (UO 1.97 and PuO 1.95 ). The temperature of this congruent melting is nearly constant (3130–3140 K) along a ternary phase boundary from UO 1.98 to U 0.55 Pu 0.45 O 1.82 and then decreases with Pu content to a maximum of approximately 3040 K for PuO 1.95. This observation is explained by the stabilisation of the hypo-stoichiometric mixed oxides due to the increase of the configurational entropy at high temperatures by the formation of oxygen vacancies and related cation mixing. The influence of the atmosphere used in the laser heating melting experiments on the oxygen stoichiometry of the sample and its solidus and liquidus temperatures is investigated. The determination of this O/M ratio after laser melting tests using XANES is also reported. The simultaneous presence of U 6+ , U 5+ , U 4+ , Pu 3+ and Pu 4+ is observed, highlighting the occurrence of charge compensation mechanisms. The samples are highly oxidised in air whereas close to stoichiometry (O/M = 2.00) in argon. These results are in agreement with the computed solidification paths. This work illustrates the complex melting behaviour of the U 1-y Pu y O 2±x fuels and highlights the need for the CALPHAD method to accurately describe and predict the high-temperature transitions of the U–Pu–O system.

Uranium–plutonium–oxygen phase diagram: investigating the solvus of fluorite's exsolution

Investigation of the solid/liquid phase transitions in the U–Pu–O system

Molten uranium dioxide structure and dynamics

First-principles study of phase stability, electronic and mechanical properties of plutonium sub-oxides

Melting behaviour of mixed plutonium and iron oxides: An experimental study

Impact of Fluorine on the Thermal Stability of Phlogopite

Plutonium oxide melt structure and covalency

Phonon spectrum, thermodynamic properties, and pressure-temperature phase diagram of uranium dioxide

Phase transition in Eu2Zr2–xO7–2x (x = 0–1) solid solutions: A combined structural and spectroscopic study

Phonon dispersion curves and thermodynamic properties of α-Pu2O3

The Role of Phlogopite in the Deep Earth&#8217;s Water and Fluorine Cycles

Chemical and Spectroscopic Characterization of Plutonium Tetrafluoride

Oxygen potential of plutonium and plutonium−americium dioxides

Determining the effects of U/Pu ratio on subsolidus phase transitions in U-Pu-Zr metallic fuel alloys

Dissolution of uranium mixed oxides: The role of oxygen vacancies vs the redox reactions

First-principles calculation of structural, magnetic and electronic properties of PuO2-H , 0≤x≤2

Visual and in Situ Raman Spectroscopic Observations of the Liquid–liquid Immiscibility in Aqueous Uranyl Sulfate Solutions at Temperatures Up to 420°C

An investigation of LnUO4 (Ln = Dy and Ho): Structures, microstructures, uranium valences and magnetic properties

Effect of oxide impurities on the dissolution behavior of Th4+, Be2+ and U4+ in fluoride salts

First-principles study on oxidation effects in uranium oxides and high-pressure high-temperature behavior of point defects in uranium dioxide

Phase equilibria in the ZrO2–YO1.5–NbO2.5 system at 1300°C and high‐temperature experiments in the ZrO2–YNbO4 subsystem