Abstract:In amorphous ferromagnetic alloys the Curie temperature (<math>Tc</math>) can be changed by modifying the short-range ordering between 3d-atoms, and the kinetics of this change depends on the details of structural relaxation. In the present work, isothermal annealing was used to control <math>Tc</math> in amorphous Fe3.9Co64.82B10.2Si12Cr9Mo0.08 and Fe5Co27.4B12.26Si12.26Ni43.08 microwires with a relatively low Curie point in as-quenched state of 61.5 <math>°C</math> and 48 <math>°C</math> , respectively. The kinetics of structural relaxation in the first alloy appears to result in stronger antiferromagnetic coupling of Cr–Fe and Cr–Co, which lowers <math>Tc</math> down to 53.5 <math>°C</math> on annealing with a temperature of 350 <math>°C</math> during 10 min. Annealing the Ni-based alloys produces a continuous increase in <math>Tc</math> with time and annealing temperatures up to high annealing temperatures near the onset of crystallization. Partial crystallization at higher annealing temperature may also contribute to <math>Tc</math>- change. We demonstrated the controllable change in the Curie temperature in these wires in the range of 53.5–68<math>°C</math> for Cr-containing alloy and 48–72<math>°C</math> for Ni-containing alloys. Fine tuning of the critical temperature can be used in a variety of sensing applications in the important industrial temperature range.

Controlling the Curie temperature in amorphous glass coated microwires by heat treatment

Temperature Dependence of the Off‐diagonal Magnetoimpedance in Sensor Configuration Utilizing Co‐rich Amorphous Wires

Temperature Dependence of Magnetic Property for Glass-Coated Metal Microwires

Tuning of magnetocaloric effect and optimization of scaling factor for Gd 55 Ni 10 Co 35 amorphous microwires

Optimizing the Nano-structure of Magnetic Micro-wires for Multifunctional Macro-composites

Effect of Annealing on the Magnetostatic and Microwave Electromagnetic Properties of Glass-Coated Fe-Rich Microwires

Improving Mechanical and Magnetocaloric Responses of Amorphous Melt-Extracted Gd-based Microwires Via Nanocrystallization

Temperature-stable magnetoimpedance (MI) of current-annealed Co-based amorphous microwires

Preparation and magnetic properties of Co2-based Heusler alloy glass-coated microwires with high Curie temperature

Temperature effects on magnetization processes and magnetoimpedance in low magnetostrictive amorphous microwires

Anomalous magnetic behavior in half-metallic Heusler Co2FeSi alloy glass-coated microwires with high Curie temperature

Competing Ferromagnetic and Antiferromagnetic Interactions Drive the Magnetocaloric Tunability in Gd55Co30NixAl15-x Microwires

High-Frequency Magnetic Impedance in (CoFeNi)BSi and (CoFeCrMo)BSi Amorphous Microwires in a Glass Sheath near the Curie Temperature

Development of thin microwires with low Curie temperature for temperature sensors applications

Influence of Isothermal Heating on the Curie Temperature of FeCoB Bulk Amorphous Alloy

Determination of temperature regimes for annealing of ferromagnetic amorphous wires obtained by the Ulitovsky – Taylor method during heating by direct current flow

Fabrication and Magneto-Structural Properties of Co2-Based Heusler Alloy Glass-Coated Microwires with High Curie Temperature

Development of Fe–Nb–Cr–B Glassy Alloys With Low Curie Temperature and Enhanced Soft Magnetic Properties

Magnetic field annealing of FeCo-based amorphous alloys to enhance thermal stability and Curie temperature

Temperature Effects on the Magnetoimpedance in Glass-Coated Amorphous Wires

Enhancing GMI properties of melt-extracted Co-based amorphous wires by twin-zone Joule annealing