Microstructure Evolution and Coordinated Deformation of the 40Cr/Q345B Bimetallic Ring Blank at High Temperature
Yanlong Jia,Huiping Qi,Youwen Liang,Zhenjiang Li,Zhuo Bian
DOI: https://doi.org/10.1007/s12540-023-01604-6
IF: 3.451
2024-01-15
Metals and Materials International
Abstract:The evolution of microstructure has a significant impact on the coordinated deformation of bimetallic materials at high temperatures. This study conducted hot compression experiments on the 40Cr/Q345B bimetallic ring blanks. Based on EBSD measurement data, the parent austenite was reconstructed, and the dynamic recrystallization (DRX) fraction was evaluated using a grain orientation spread method. The DRX evolution of bimetallic ring blanks during hot deformation was studied, and the effects of different deformation conditions on the microstructure, microhardness, and interface element diffusion were analyzed. The coordinated deformation mechanism of the bimetallic ring blank at high temperatures was investigated. The results indicate that the 40Cr/Q345B bimetallic ring blank produced by centrifugal casting formed a 4.2 mm thick bonding layer (BL), with a smooth transition of elements, microstructure distribution, and grain size. The DRX evolution of 40Cr, BL, and Q345B was not synchronized, and the DRX of 40Cr occurred earlier with stable deformation. Q345B had a lower degree of DRX and a tendency of localized flow. The evolution of the BL approached 40Cr. When the strain reached 0.69, the DRX volume fractions of 40Cr, BL, and Q345B were 88.25%, 81.9%, and 53.77%, respectively. At higher temperatures and lower strain rates, the average grain sizes of 40Cr, BL, and Q345B were 150.6, 139.33, and 128.84 μm with severe grain coarsening. Coordinated deformation was enhanced by increasing the temperature and strain rate. Higher temperatures or lower strain rates increased the thickness of the metallurgical BL by promoting element diffusion. The synergistic strengthening effect of heterogeneous deformation induced strengthening and work hardening, combined with the DRX evolution gradient at the BL, played a coordinating role in the microstructure evolution of the bimetallic ring blank. Graphical
materials science, multidisciplinary,metallurgy & metallurgical engineering