Abstract:In this study, the electrochemical performance and discharge behavior of Mg-Li-Zn-Gd alloys with α-Mg and β-Li-based anode material are investigated, with the aim to improve the anode performance of Mg-air batteries. The experimental anode alloys with detailed Mg-8Li-xZn-yGd (x = 1, 2, 3; y = 1, 2, 3 wt.%) components are prepared, and extrusion deformation is carried out on these alloys. Simultaneously, scanning electron microscope (SEM), X-ray diffractometer (XRD), electrochemical workstation, and constant current discharge systems are applied for microstructure characterization, corrosion, and discharge performance testing. The results show that the experimental alloys are composed of an α-Mg and β-Li dual matrix, with W-Mg3Gd2Zn3, Mg3Gd, and MgLiZn second phases. Meanwhile, extrusion deformation promotes the recrystallization process through the particle-induced nucleation mechanism. The corrosion resistance is improved with the increasing Zn/Gd ratio, and the extruded Mg-8Li-2Zn-1Gd (LZG821) alloy exhibits the optimum corrosion resistance, with a corrosion rate of 0.493 mm·year−1. In addition, the extruded Mg-8Li-1Zn-1Gd (LZG811) alloy has the optimal discharge performance, with a discharge specific capacity of 1371.04 mA·g−1 at a current density of 40 mA∙cm−2, and its anode efficiency reaches nearly 70%. The poorer discharge properties of the Mg-8Li-2Zn-1Gd (LZG821) and Mg-8Li-2Zn-3Gd (LZG823) alloys are attributed to their refined grains, which could bring severe intergranular corrosion while increasing the grain boundary density.

Processing Micro-Alloyed Mg-La Binary Alloy into a High-Performance Mg-Air Battery Anode via Extrusion

Micro-Alloyed Mg-Al-Mn-La Anode for Mg-Air Batteries

Microstructure and discharge performance of Mg-La alloys as the anodes for primary magnesium-air batteries

Tailoring the discharge performance of extruded Mg-Sm-Al anode for Mg-air battery applications via control of Al content

Tailoring the electrochemical behavior and discharge performance of Mg–Al–Ca–Mn anodes for Mg-air batteries by different extrusion ratios

Corrosion and discharge behavior of Mg−xLa alloys (x=0.0−0.8) as anode materials

Effects of Microstructure on the Electrochemical Discharge Behavior of Mg-6wt%Al-1wt%Sn Alloy As Anode for Mg-air Primary Battery

Enhancement of Discharge Properties of an Extruded Mg-Al-Pb Anode for Seawater-Activated Battery by Lanthanum Addition

Tailoring the microstructure and improving the discharge properties of dilute Mg-Sn-Mn-Ca alloy as anode for Mg-air battery through homogenization prior to extrusion

Microstructure and Electrochemical Corrosion Behavior of Extruded Mg–Al–Pb–La Alloy As Anode for Seawater-Activated Battery

The Dependence of Electrochemical Behavior and Discharge Performance on the Zn/Gd Ratio of Mg-Li-Zn-Gd Anodes for Mg-Air Batteries

Constructing dilute Mg-1.0In binary alloy: A pathway to enhanced anode performance in Mg-air battery

The Corrosion and Discharge Behavior of High-Performance Mg-7Li-1Y Alloy As Anode for Mg-air Batteries

Discharge performance of extruded Mg-Bi binary alloys as anodes for primary Mg-air batteries

Improved Discharge Performance of AZ72-0.05La Alloy Anode via Refining Mg17Al12 Phase

Elucidating the dependence of electrochemical behavior and discharge performance on the grain structure of lean Mg-0.3Bi-0.3Ag-0.3In anodes in primary Mg-air battery

Tailoring the microstructure of Mg-Al-Sn-RE alloy via friction stir processing and the impact on its electrochemical discharge behaviour as the anode for Mg-air battery

Achieving Ultrahigh Anodic-Efficiency and Energy-Density Mg–air Battery Via the Discharge Product Film Design of Bulk Mg Anode

Microstructure and discharge performance of Mg–6Al and Mg–6Al-0.5Er alloys

Effects of Al and Sn on Microstructure, Corrosion Behavior and Electrochemical Performance of Mg–Al-based Anodes for Magnesium-Air Batteries

Corrosion Behaviour and Discharge Properties of Extruded Mg-Zn-Ca Anodes for Primary Mg-air Batteries