Abstract:This article presents a 14-bit fully dynamic sensor interface that consists of a switched-capacitor (SC) Delta Sigma modulator and a dynamic bandgap reference (BGR). The BGR is implemented by summing the proportional to absolute temperature (PTAT) and complementary to absolute temperature (CTAT) outputs of two PNP-based capacitive DACs. At the sampling rate, the DAC capacitors are pre-charged to the supply and then discharged for a fixed period via PNPs, thus biasing them and simultaneously sampling their base-emitter voltages. By using the modulator's first integrator to sum the DAC outputs, a dynamic BGR can be realized, which does not need additional reference buffers or decoupling capacitors. To make the system fully dynamic, the modulator itself is based on capacitively biased (CB) floating inverter amplifiers (FIAs). Implemented in a standard 130-nm CMOS process, the sensor interface occupies an area of 0.2 mm(2). It achieves an SNDR of > 84.5 dB over a scalable bandwidth (BW) ranging from 98 Hz to 5.9 kHz while consuming 1.7-50.8 mu W. Furthermore, by employing a time-domain temperature-compensation scheme, it achieves a batch-trimmed gain error of +/- 0.26 % from - 40 degree celsius to 125 degree celsius.

A 0.84-μA bandgap for high step-down DC-DC convertors with thermal compensation and protection

A 2.2ppm/°c Compensated Bandgap Voltage Reference with a Double-Ended Current Trimming Technique.

A High Precision Circuit of Bandgap Voltage Reference

A Low Drift Curvature-Compensated Bandgap Reference with Trimming Resistive Circuit

A current reference based on bandgap technology with wide input voltage range by using 0.18µm BCD process

A 0.9-V high-PSRR bandgap with self-cascode current mirror

A New Digital to Analog Converter Based on Low-Offset Bandgap Reference.

A High Accuracy and Configurable Voltage (1.2/1.8/2.5/3.3 V) Bandgap Reference with Base Current Compensation for DC–DC Converters

A 6 Ppm/°c Capacitively-Biased Diode Based Novel Bandgap Circuit with Driving Capability and Calibration

A 0.885ppm/°C digitally calibrated bandgap voltage reference with robust start-up circuit

A 14-B BW /power Scalable Sensor Interface with a Dynamic Bandgap Reference

A 2.47-10V Curvature-corrected Bandgap Reference for LDO

A High-Order Compensated Op-amp-less Bandgap Reference with 39 ppm/ °C over -260~125 °C Temperature Range and -50 dB PSRR

A Sub-1ppm/°C Current-Mode CMOS Bandgap Reference with Piecewise Curvature Compensation

A New Bandgap Reference for High-Resolution Data Converters

A 2.25 ppm/°C High-Order Temperature-Segmented Compensation Bandgap Reference

A 0.6 ppm/°C current-mode bandgap with second-order temperature compensation

A 3.0-V 4.2-Μa 2.23-Ppm/°c BGR with Cross-connected NPNs and Base-current Compensation

A Novel High-Precision Bandgap Reference with Differential Common-Gate Structure

Design of a High PSRR Low-pressure Bandgap Reference Source with Curvature Compensation

A 1-V 2.69-ppm/°C 0.8-μW bandgap reference with piecewise exponential curvature compensation