Experimental and numerical study of the seismic behavior of cold-formed steel walls with diagonal braces

Yu Shi,Xiaowei Ran,Wen Xiao,Ke Ke,Yi Xiang,Rui Deng

DOI: https://doi.org/10.1016/j.tws.2020.107318

2021-02-01

Abstract:<p>In this paper, the seismic performance of cold-formed thin-walled steel walls with diagonal braces is studied by means of experiments and finite element analysis. In total, horizontal hysteretic loading tests were carried out on six full-scale cold-formed thin-walled steel walls. The influence of diagonal bracing, the screw spacing, wall panels and vertical loads on the seismic performance of the walls was investigated from the aspects of hysteretic curves, skeleton curves, the lateral stiffness degradation and the energy dissipation capacity. It was found that diagonal bracing could significantly improve the load-bearing capacity, stiffness, and energy dissipation capacity of the walls. However, the lateral resistance increased slightly because of premature buckling of the transverse braces at the connection between the diagonal and transverse braces. In addition, finite element models of the wall specimens were established by ABAQUS software and validated against the experimental data. A preliminary parametric study was also conducted to further examine the influence of essential parameters on the behavior of cold-formed steel walls with diagonal braces.</p>

engineering, mechanical,mechanics, civil

What problem does this paper attempt to address?

This paper aims to study the performance of cold - formed thin - walled steel walls under seismic action and is explored through two methods: experiment and finite - element analysis. Specifically, the researchers carried out six groups of full - scale horizontal hysteretic loading tests on cold - formed thin - walled steel walls to evaluate the influence of factors such as diagonal bracing, screw spacing, wall panels and vertical loads on the seismic performance of the walls. The focus of the study is to analyze the changes in hysteretic curves, skeleton curves, lateral stiffness degradation and energy dissipation capacity, so as to gain an in - depth understanding of how these factors affect the bearing capacity, stiffness and energy dissipation capacity of cold - formed thin - walled steel walls. In addition, the study also used ABAQUS software to establish a finite - element model of the wall specimens, and compared and verified it with the experimental data, and further examined the influence of key parameters on the behavior of cold - formed thin - walled steel walls through parametric research.