Abstract:In high-rise buildings, reinforced concrete (RC) shear walls, particularly those forming part of coupled wall systems or core wall systems, may be subjected to coupled axial tension and cyclic lateral loads during strong seismic events. A new two-dimensional material model named the "Fixed Angle Model Considering Crack Sliding" (FAM-CS) was proposed for simulating the nonlinear behavior of RC walls subjected to axial tension and cyclic lateral loads. The proposed model was implemented in the OpenSees platform. Nonlinear constitutive models for shear aggregate interlock effects of concrete and dowel action of rebars were incorporated into the proposed model to represent the shear transfer mechanisms along concrete cracks. The proposed model was validated against the test data of six wall specimens subjected to coupled axial tension and cyclic lateral loads. The results indicated that the proposed model reasonably predicted the lateral strength capacity (an average error of 6.2 %) and the residual strength at the maximum drift loading (an average error of 12.3 %) of the specimens. For comparison, three other commonly used models, the Shear-Flexure Interaction Multiple-VerticalLine-Element-Model, the multi-layer shell element model and the Cyclic Softened Membrane Model were adopted for the simulation of the specimens. Compared with the three existing OpenSees models, the newly implemented material model provided improved predictions of the wall hysteretic behavior with respect to lateral strength capacity, lateral strength degradation, pinching characteristics and cyclic stiffness degradation. In addition, the proposed model reasonably captured the localized failure pattern as well as the energy dissipation characteristics of the test specimens. Finally, a mesh sensitivity study was conducted to assess the robustness of the proposed model. The results revealed that the proposed model was robust regarding the lateral load-drift responses of RC walls, with a mesh size ranging from approximately one to three times the average crack spacing.

Simulation study on shear resistance of new cold-formed-steel-framed shear walls sheathed with steel sheet and gypsum boards

Seismic Behavior of Composite Shear Walls Incorporating Concrete-Filled Steel and FRP Tubes As Boundary Elements

Experimental study and numerical simulation of seismic performance of stiffened thin steel plate shear walls considering the effect of vertical load on frame column

Seismic Performance of Reinforced Concrete Squat Walls with Embedded Cold-Formed and Thin Walled Steel Truss

Finite Element Investigation of a Novel Cold-Formed Steel Shear Wall

Research on shear resistance of cold-formed steel stud composite walls

Numerical Study on the Seismic Performance of Cold-Formed Steel Shear Walls with Steel Sheathing and Gypsum Board

Shear Resistance of Stiffened Steel Corrugated Shear Walls

Experiments and Numerical Simulations on the Seismic Performance of Steel-Frame Composite Wallboard Shear Walls

Experimental, numerical and analytical studies on full-scale cold-formed steel center-sheathed shear walls subjected to combined loading

Investigation of the shear resistances of steel-concrete-steel composite structures with bidirectional webs

Numerical Simulation and Shear Capacity Study of a New Double-Steel-Plate Shear Wall

Behaviour of cold-formed steel framed shear walls with slitted sheathing under lateral loading

Seismic Analysis and Design of Composite Shear Wall with Stiffened Steel Plate and Infilled Concrete

New OpenSees Material Model for Simulating Reinforced Concrete Shear Walls Subjected to Coupled Axial Tension and Cyclic Lateral Loads

Experimental investigation of shear resistance of cold-formed steel framed sheathed walls

Experimental study on the seismic behavior of high-performance cold-formed steel plate shear walls

Numerical modeling on shear performance of braced cold-formed steel composite walls

Test study for the performance of wood-cold-formed steel frame shear walls with difference detailed configurations

Experimental and Numerical Investigation of Integrated Steel Shear Walls with Varying Web Width-to-Thickness Ratios

Finite element analysis of rectangular and flanged steel‐concrete shear walls under cyclic loading