Abstract:While age-hardened austenitic high-Mn and high-Al lightweight steels exhibit excellent strength-ductility combinations, their properties are strongly degraded when mechanically loaded under harsh environments, e.g. with the presence of hydrogen (H). The H embrittlement in this type of materials, especially pertaining to the effect of κ-carbide precipitation, has been scarcely studied. Here we focus on this subject, using a Fe-28.4Mn-8.3Al-1.3C (wt%) steel in different microstructure conditions, namely, solute solution treated and age-hardened. Contrary to the reports that grain boundary (GB) κ-carbides precipitate only during overaging, site-specific atom probe tomography and scanning transmission electron microscopy (STEM) reveal the existence of nanosized GB κ-carbides at early stages of aging. We correlate this observation with the deterioration of H embrittlement resistance in aged samples. While H pre-charged solution-treated samples fail by intergranular fracture at depths consistent with the H ingress depth (∼20 μm), age-hardened samples show intergranular fracture features at a much larger depth of above 500 μm, despite similar amount of H introduced into the material. This difference is explained in terms of the facile H-induced decohesion of GB κ-carbides/matrix interfaces where H can be continuously supplied through internal short-distance diffusion to the propagating crack tips. The H-associated decohesion mechanisms are supported by a comparison with the fracture behavior in samples loaded under the cryogenic temperature and can be explained based on dislocation pileups and elastic misfit at the GB κ-carbide/matrix interfaces. The roles of other plasticity-associated H embrittlement mechanisms are also discussed in this work based on careful investigations of the dislocation activities near the H-induced cracks. Possible alloying and microstructure design strategies for the enhancement of the H embrittlement resistance in this alloy family are also suggested.

Atomic scale understanding of the role of hydrogen and oxygen segregation in the embrittlement of grain boundaries in a twinning induced plasticity steel

Hydrogen embrittlement of twinning-induced plasticity steels: Contribution of segregation to twin boundaries

Hydrogen-induced hardening of a high-manganese twinning induced plasticity steel

Twinning behavior and hydrogen embrittlement of a pre-strained twinning-induced plasticity (TWIP) steel

Reveal Hydrogen Behavior at Grain Boundaries in Fe–22Mn–0.6C TWIP Steel via In Situ Micropillar Compression Test

Effect of manganese content on the hydrogen embrittlement of twinning-induced plasticity (TWIP) steels under hydrogen charging and hydrogen environment

Hydrogen embrittlement resistance of TWIP (twinning-induced plasticity) steel in high pressure hydrogen environment

Enhancement of hydrogen embrittlement resistance in a Fe-18Mn-0.6C twinning induced plasticity steel by copper alloying

The role of reverted transformation in hydrogen embrittlement of a Cu-containing low carbon high strength steel

Hydrogen-enhanced densified twinning (HEDT) in a twinning-induced plasticity (TWIP) steel

Hydrogen-associated decohesion and localized plasticity in a high-Mn and high-Al two-phase lightweight steel

On the role of the stacking fault energy in the beneficial effect of aluminium on the hydrogen embrittlement sensitivity of twinning-induced plasticity (TWIP) steel

Hydrogen and deuterium charging of lifted-out specimens for atom probe tomography

Embrittlement of Notched Duplex Stainless Steel: Role of Hydrogen-Assisted Void Growth and Cleavage

Ab Initio Investigation Of Phosphorus And Hydrogen Co-segregation And Embrittlement In α-fe Twin Boundaries

Hydrogen-assisted decohesion associated with nanosized grain boundary κ-carbides in a high-Mn lightweight steel

Application of DFT Simulation to the Investigation of Hydrogen Embrittlement Mechanism and Design of High Strength Low Alloy Steel

Effects of heterogeneous plastic strain on hydrogen-induced cracking of twinning-induced plasticity steel: A quantitative approach

Atomic-scale insights on hydrogen trapping and exclusion at incoherent interfaces of nanoprecipitates in martensitic steels

Grain boundary alloying segregation to resist hydrogen embrittlement in BCC-Fe steels: Atomistic insights into solute-hydrogen interactions

Atomistic investigation of hydrogen induced decohesion of Ni grain boundaries