Abstract:High-manganese twinning-induced plasticity (TWIP) steels exhibit high strain hardening, high tensile strength, and high ductility, which make them attractive for structural applications. At low tensile strain rates, TWIP steels are prone to hydrogen embrittlement (HE). Here though, we study the hardening and strengthening resulting from electrochemical hydrogen-charging of a surface layer of a Fe-26.9Mn-0.28C (wt.%) TWIP steel. We observed a 20% increase in yield strength following the electrochemical hydrogen-charging, accompanied by a reduction in ductility from 75% to 10% at a tensile strain rate of 10−3s−1. The microstructural evolution during tensile deformation was examined at strain levels of 3%, 5% and 7% by electron backscatter diffraction (EBSD) and electron channeling contrast imaging (ECCI) to study the dislocation structure of the hardened region. As expected, the microstructure of the hydrogen-hardened and the uncharged regions of the material evolve differently. The uncharged areas show entangled dislocation structures, indicating slip from a limited number of potentially coplanar slip systems. In contrast, hydrogen segregated to the grain boundaries, revealed by the deuterium-labelled atom probe tomography, delays the dislocation nucleation by blocking dislocation sources at the grain boundaries. The charged areas hence first show the formation of cells, indicating dislocation entanglement from more non-coplanar slip systems. With increasing strain, these cells dissolve, and stacking faults and strain-induced ε-martensite are formed, promoted by the presence of hydrogen. The influence of hydrogen on dislocation structures and the overall deformation mechanism is discussed in details.

Hydrogen embrittlement resistance of TWIP (twinning-induced plasticity) steel in high pressure hydrogen environment

Effect of manganese content on the hydrogen embrittlement of twinning-induced plasticity (TWIP) steels under hydrogen charging and hydrogen environment

Twinning behavior and hydrogen embrittlement of a pre-strained twinning-induced plasticity (TWIP) steel

Hydrogen-enhanced densified twinning (HEDT) in a twinning-induced plasticity (TWIP) steel

Hydrogen embrittlement of twinning-induced plasticity steels: Contribution of segregation to twin boundaries

Hydrogen-induced hardening of a high-manganese twinning induced plasticity steel

Enhancement of hydrogen embrittlement resistance in a Fe-18Mn-0.6C twinning induced plasticity steel by copper alloying

Effect of pre-strain on hydrogen embrittlement of high manganese steel

Reveal Hydrogen Behavior at Grain Boundaries in Fe–22Mn–0.6C TWIP Steel via In Situ Micropillar Compression Test

Atomic scale understanding of the role of hydrogen and oxygen segregation in the embrittlement of grain boundaries in a twinning induced plasticity steel

Effects of heterogeneous plastic strain on hydrogen-induced cracking of twinning-induced plasticity steel: A quantitative approach

Investigations of dislocation-type evolution and strain hardening during mechanical twinning in Fe-22Mn-0.6C twinning-induced plasticity steel

Effect of hydrogen charging intensities and times on hydrogen embrittlement of Q&P980 steel

Effect of pre-strain on critical conditions for hydrogen-induced delayed cracking and crack nucleation characteristic of DP1180 steel

Hydrogen embrittlement mechanisms in advanced high strength steel

Hot Deformation Behavior and Dynamic Recrystallization Mechanism of Fe-18.2Mn-0.52C Twinning-Induced Plasticity Steel

Revealing the Individual Hardening Effects of Twins, Dislocations, Grain Boundaries and Solid Solution in a Twinning-Induced Plasticity Steel

Impact of hydrogen embrittlement on the tensile-shear property of resistance spot-welded advanced high-strength martensitic steels

Microstructure evolution of ultra-high-strength twinning-induced plasticity (TWIP) steel under dynamic loading

A Nanotwinned Austenite Stainless Steel with High Hydrogen Embrittlement Resistance

Effects of Twin-Dislocation and Twin-Twin Interactions on the Strain Hardening Behavior of TWIP Steels