Abstract:The study of alloys exhibiting noteworthy strength-ductility synergy at ambient and cryogenic temperatures has been a persistent area of interest in materials engineering. This interest extends to the recent development of high-entropy alloys (HEAs). The current investigation delves into the impact of diverse thermo-mechanical treatments on the phase and microstructure evolution in a face-centered cubic (FCC) Al7.5Co20.5Fe24Ni24Cr24 HEA. The transition from solid-solution annealing to recrystallization annealing leads to the formation of the desired hierarchical B2+L12+ σ precipitates, accompanied by a heterogeneous FCC matrix. The initiation of the B2 phase originates from nucleation on defect-rich sites, such as deformation bands. However, the coherent L12 phase homogeneously forms in the FCC matrix at intermediate temperature aging, as these sites are scarce or occupied. A heterogeneous structure emerges from the transition in annealing temperatures and the pinning effect of the B2 precipitates. The resulting heterogeneous structure exhibits an exceptional strength-ductility synergy at both room and liquid nitrogen (LN2) temperatures. This is evident in its mechanical properties with a yield strength of ∼717 MPa / ∼1109 MPa, an ultimate tensile strength of ∼1086 MPa / ∼1609 MPa, and an elongation of ∼34.3 % / ∼43.2 % at room / LN2 temperatures. The formation of deformation twins (DTs) is facilitated by localized stress buildup from hetero-deformation-induced (HDI) hardening stress at room temperature. The exceptional strength and ductility at LN2 temperature are attributed to a combination of factors. These include a high-density of stacking faults (SFs), DTs, and their interactions, including those with precipitates, SFs-based substructures, and Lomer-Cottrell locks. These multiple deformation mechanisms ensure consistent and sustained strain-hardening even under substantial strain. This paper sheds light on the complex interplay of microstructure, deformation mechanisms, and mechanical properties in the Al7.5Co20.5Fe24Ni24Cr24 HEA, potentially guiding the development of ultra-strong yet ductile alloys for cryogenic applications.

Micromechanical origin for the wide range of strength-ductility trade-off in metastable high entropy alloys†

Experimental and DFT Investigations of AlNbTiVZr High Entropy Alloys with Excellent Mechanical Properties

Excellent strength-ductility synergy and corrosion resistance in a metastable high entropy alloy via heterogeneous structure design

Atomic Deformation Mechanism and Interface Toughening in Metastable High Entropy Alloy

Achieving exceptional strength-ductility synergy in a dual-phase high entropy alloy via architected complex microstructures

Strain partitioning enables excellent tensile ductility in precipitated heterogeneous high-entropy alloys with gigapascal yield strength

Metastable high-entropy dual-phase alloys overcome the strength-ductility trade-off

Microstructure evolution and mechanical behavior of a CoCrFeNiMn0.75Cu0.25 high-entropy alloy by thermo-mechanical treatment

Theory-guided design of high-entropy alloys with enhanced strength-ductility synergy

Simultaneously enhancing strength–ductility synergy in refractory high entropy alloys by a heterogeneous structure design

Heterogeneous Microstructure and Tensile Properties of Fe50Mn30Co10Cr10 Metastable High-Entropy Alloy

Enhancement of Strength-Ductility Trade-off in a High-Entropy Alloy Through a Heterogeneous Structure

Tailoring heterogeneities in high-entropy alloys to promote strength–ductility synergy

Mechanical behavior and microstructure-property correlation of a metastable interstitial high entropy alloy with hierarchical gradient structures

Anomalous size effect on yield strength enabled by compositional heterogeneity in high-entropy alloy nanoparticles

Strong and Ductile Non-equiatomic High-Entropy Alloys: Design, Processing, Microstructure, and Mechanical Properties

A new strategy to overcome the strength-ductility trade off of high entropy alloy

Exceptional strength-ductility synergy at room and liquid nitrogen temperatures of Al7.5Co20.5Fe24Ni24Cr24 high-entropy alloy with hierarchical precipitate heterogeneous structure

Achieving excellent strength-ductility synergy via high density dislocation and nano-twinning in cryo-rolled FeCoCrNiMo0.2 high-entropy alloy

Achieving High Strength and Ductility in High-Entropy Alloys Via Spinodal Decomposition-Induced Compositional Heterogeneity

Effects of plasticity-induced martensitic transformation and grain refinement on the evolution of microstructure and mechanical properties of a metastable high entropy alloy