Abstract:Concrete-filled steel tube (CFST) arch bridges have a high center of gravity and a substantial mass, resulting in a discernible seismic response. Consequently, long-span CFST arch bridges must retain exceptional seismic performance and appropriate seismic control design. In this study, the dynamic response and seismic performance of a unique swallow-type CFST arch bridge when subjected to longitudinal earthquake forces were analyzed using numerical simulation methods. The displacement and axial force response results and their laws of the key bridge components were obtained. Taking into account seismic checking calculations, two damping measures were proposed for the CFST arch bridge, as the relative displacement of the girder end exceeded the allowable value specified. The appropriate design parameters for viscous dampers and lead shear dampers were examined. Additionally, the seismic performance of these dampers was verified through a shaking table test using a 1:16 scale model. The findings indicated that when subjected to Wenchuan Wolong wave action, the relative displacement between the steel box girder and the concrete girder of the bridge was significantly larger, leading to girder end pounding. The limit values were surpassed by 32.5% and 50%, when subjected to the uniform and traveling wave excitations, respectively, thus indicating that the expansion joint was the most vulnerable component. Following the selection of optimal parameters for the dampers, the dampers exhibited the capability to mitigate seismic and pounding impacts. Long-span CFST arch bridges with dampers were found to effectively reduce the seismic response of the skewback strain and vault, as well as the relative displacement of the girder ends. Furthermore, the average maximum damping rates achieved by the viscous damper and the lead shear damper reached 44.9% and 44.6%, respectively.

Additional viscous dampers for double-column rocking bridge system: Seismic response and overturning analysis

Seismic response analysis of the precast double-deck rocking frame bridge pier system

Seismic response of a Reduced-scale continuous girder bridge with rocking Columns: Experiment and analysis

Shake Table Test on a Long-Span Cable-Stayed Bridge with Viscous Dampers Considering Wave Passage Effects

Shaking table experimental study and theoretical analysis of the longitudinal seismic-reduced behavior of continuous-beam bridges

Stochastic Seismic Response Analysis of Long-span Continuous Rigid Frame Bridge

A finite element model for seismic response analysis of free-standing rocking columns with vertical dampers

Overturning resistant capacities of rocking frames with supplemental vibration control devices under pulse-type excitations

Ground Motion Frequency Insensitivity of Bearing-Supported Pedestrian Bridge with Viscous Dampers

Development of rocking isolation bearing system (RIBS) to control excessive seismic responses of bridge structures

Seismic Response of Yielding Structures Coupled to Rocking Walls with Supplemental Damping

Seismic Response Analysis and Shock Absorption Control of Self-anchored Cable-stayed Suspension Bridge

Shaking Table Model Test of Long-span Continuous Girder Bridge with Longitudinal Seismic Energy Dissipating

Shaking table test study on the seismic control of concrete-filled steel tube arch bridges based on dampers

Design Method of Viscous Dampers in Shaking Table Model Test

Seismic Response Analysis of Structures with Velocity-Dependent Dampers

Study on Energy Dissipation of Viscous Damper for Long-Span Suspension Bridges

Energy-based additional damping on bridges to account for vehicle-bridge interaction

Lateral Vibration Mitigation for Coupled High-Speed Rail Vehicle and Cable-Stayed Bridge System Subjected to Ground Motions

Experimental and numerical study of beam-through energy-dissipative rocking columns for mitigating seismic responses

Design method of energy-dissipating earthquake-reduction along longitudinal direction of self-anchored suspension bridge