Abstract:Carbon nanotubes (CNTs) have excellent electrical properties. However, it is challenging to demonstrate these properties in actual electrochemical measurements fully. Previous research has improved the electrical properties of CNTs through welding experiments. But the mechanism of the conductivity enhancement is still unclear. The welding process lacks adequate mechanistic studies and theoretical models. This article presents a theoretical model of a CNT circuit with staggered electrodes, which considers the effect of twist angle on a CNT bundle. A welding model of the CNT bundle circuit is also developed based on the structural changes of CNTs after welding and characterized by the resistance ratio of the CNT circuit pre- and post-welding. The welding model is analyzed to explore how the quantity, diameter, and length of CNTs in the bundle affect the welding effect. An electrical measurement system for CNTs was established to validate the welding model using a nanomanipulation system compatible with a scanning electron microscope. Then, a constant voltage and long-duration electric welding experiment was performed, which showed that the conductivity was enhanced about 1.5–4 times after welding. The results also demonstrated that longer and fewer CNTs in the bundle could improve the electrical conductivity by the welding process more significantly. These findings were consistent with the trend of the welding model. This article establishes a welding theoretical model of the CNT bundle with staggered electrodes, which effectively accounts for the electrical conductivity enhancement during CNT welding and will help more fully express excellent performance in carbon-based nanoelectronic devices, nanoelectromechanical systems, and electrocatalysts in its manufacturing stage.

Welding Model for a Carbon Nanotube Bundle with Staggered Electrodes: Implications for Conductivity with Joule Heating

Modeling of carbon nanotube (CNT) interconnects

Modeling of Carbon Nanotube Interconnects and Comparative Analysis with Cu Interconnects

Thermal Conductivity Of Configurable Two-Dimensional Carbon Nanotube Architecture And Strain Modulation

Electrothermal Characterization of Single-Walled Carbon Nanotube (SWCNT) Interconnect Arrays

Circuit Modeling and Performance Analysis of Multi-Walled Carbon Nanotube Interconnects

High-Frequency Analysis of Cu-Carbon Nanotube Composite Through-Silicon Vias

Length-dependent Electrical and Thermal Properties of Carbon Nanotube-Loaded Epoxy Nanocomposites

Carbon Welding by Ultrafast Joule Heating.

An Analytical Model of Effective Electrical Conductivity of Carbon Nanotube Composites

Fabrication and Electrical and Mechanical Properties of Carbon Nanotube Interconnections

Ultrasonic Welding of Bulk Carbon Nanotube Conductors

Microstructural Welding Engineering of Carbon Nanotube/Polydimethylsiloxane Nanocomposites with Improved Interfacial Thermal Transport

Interaction Models for Effective Thermal and Electric Conductivities of Carbon Nanotube Composites

Decrease of contact resistance at the interface of carbon nanotube/electrode by nanowelding

Electrical Conductivity of Multiwall Carbon Nanotube Bundles Contacting with Metal Electrodes by Nano Manipulators inside SEM

Cover Picture: Fabrication and Electrical and Mechanical Properties of Carbon Nanotube Interconnections (adv. Funct. Mater. 11/2005)

Enhancing the Thermal Conductivity of Randomly Oriented Cnt Networks Via Welded Junctions

Can Carbon Nanotube Fibers Achieve The Ultimate Conductivity?-Coupled-Mode Analysis For Electron Transport Through The Carbon Nanotube Contact

Tailoring The Intrinsic Metallic States Of Double-Walled Nanotube Films By Self-Soldered Laser Welding

The Influence of Carbon Nanotube's Conductivity and Diameter on Its Thermionic Electron Emission