Abstract:Phase change materials (PCMs) can regulate asphalt temperature through thermal storage properties to prevent thermal damage in asphalt pavements. However, the effects of PCMs on the thermoregulation and rheological properties of asphalt require further study. In this study, polyurethane solid-solid phase change materials (PUSSPCMs) were prepared to impart thermoregulation properties to asphalt, and the effects of PUSSPCMs on the rheological properties and microscopic characterization of asphalt were investigated. The PUSSPCMs were produced by different soft segment mass fractions (70 %, 80 %, and 90 %), and they were used to prepare modified asphalt with varying contents (3 %, 5 %, and 7 %). Thermoregulation testing system, dynamic shear rheology (DSR), bending beam rheology (BBR) tests, differential scanning calorimetry (DSC), infrared spec-troscopy (FTIR), scanning electron microscopy (SEM), and atomic force microscopy (AFM) were conducted to determine the thermoregulation, rheological properties, and modification mechanism of PUSSPCM-modified asphalt, respectively. The results show that the thermoregulation property of PUSSPCM-modified asphalt im-proves with the increase of soft segment mass fraction and content, 7 % P90 asphalt exhibits the best thermo-regulation property with the excellent delayed time (1105 s) and temperature difference (7.1 celcius). The high -temperature rutting resistance of the modified asphalt is enhanced by decreasing the soft segment mass frac-tion and increasing the content of PUSSPCMs, with the 7 % P70 being the best asphalt type. The 7 % P90 asphalt exhibits the optimum low-temperature creep performance due to a higher soft segment mass fraction. The modified asphalt may be a physical modification since no new characteristic peaks appear. With the increase of soft segment mass fraction, the PUSSPCMs in asphalt transform from elastomer to a ribbon-like structure. Furthermore, the microscopic roughness (Sq) and Young's modulus of the modified asphalt decline with the increase in soft segment mass fraction and content of PUSSPCMs, implying an increase in microscopic crack resistance and a decrease in elasticity.

Morphology changes of polymer solid-solid phase change material in high-viscosity modified asphalt (HVMA) and its influence on the properties of HVMA

Design and Modification Mechanism of a Novel High-Viscosity Thermoplastic Polyurethane Modified Asphalt

Research on High- and Low-Temperature Rheological Properties of High-Viscosity Modified Asphalt Binder

Investigation of Viscoelastic Properties of Polymer-Modified Asphalt at Low Temperature Based on Gray Relational Analysis

Viscoelastic Mechanical Responses of HMAP under Moving Load.

A novel solid–solid phase change material used to temperature regulation in asphalt mixture: preparation and properties

Application of phase change material in asphalt mixture – A review

Thermoregulation, Rheological Properties and Modification Mechanism of Asphalt Modified with PUSSPCMs

Effect of polyethylene glycol/polyacrylamide graft copolymerizaton phase change materials on the performance of asphalt mixture for road engineering

Low-temperature organic phase change material microcapsules for asphalt pavement: preparation, characterisation and application

Preparation and Experimental Study of Phase Change Materials for Asphalt Pavement

Assessment of high-enthalpy composite eutectic phase change materials efficiency in asphalt binders for cooling pavements

Investigation of the Properties of High-Viscosity Modified Asphalt Binder under Hygrothermal Environments

Temperature responses of asphalt pavement structure constructed with phase change material by applying finite element method

Thermoregulation Performance and Mechanical Properties of Phase Change Asphalt Mortars

Effects of Polyethylene Glycol/Porous Silica Form-Stabilized Phase Change Materials on the Performance of Asphalt Binders

Design and properties of polyurethane solid–solid phase-change granular temperature regulation asphalt mixtures

A review of phase change materials in asphalt binder and asphalt mixture

Preparation of polyurethane solid-solid low temperature PCMs granular asphalt mixes and study of phase change temperature control behavior

Utilization of micro encapsulated phase change material in asphalt concrete for improving low-temperature properties and delaying black ice

Influence of low-temperature polyurethane solid-solid PCMs particles on the pavement performance of asphalt mixtures