Abstract:This study aimed to address the issue of high-temperature challenges in asphalt pavement by developing two types of phase change materials (PCMs) for temperature control. Encapsulated paraffin wax particles (EPWP) and encapsulated myristic acid particles (EMAP) were synthesized using acid-etched ceramsite (AECS) as the carrier, paraffin wax (PW) or myristic acid (MA) as the core material, and a combination of epoxy resin and cement as the encapsulation material. The investigation encompassed leakage tests on PCMs; rutting plate rolling forming tests; SEM, FTIR, XRD, and TG-DSC microscopic tests; as well as heat storage and release tests and temperature control assessments using a light heating device. The study revealed the following key findings. Both types of PCMs exhibited no PCM leakage even under high temperatures and demonstrated low crushing ratios during rut-forming tests. Microscopic evaluations confirmed the chemical stability and phase compatibility of the constituents within the two types of PCMs. Notably, the phase change enthalpies of EPWP and EMAP were relatively high, measuring 133.31 J/g and 138.52 J/g, respectively. The utilization of AECS as the carrier for PCMs led to a substantial 4.61-fold increase in the adsorption rate. Moreover, the PCMs showcased minimal mass loss at 180 °C, rendering them suitable for asphalt pavement applications. The heat storage and release experiments further underscored the PCMs' capacity to regulate ambient temperatures through heat absorption and release. When subjected to light heating, the maximum temperatures of the two types of phase change Marshall specimens were notably lower by 6.6 °C and 4.8 °C, respectively, compared to standard Marshall specimens. Based on comprehensive testing, EPWP displayed enhanced adaptability and demonstrated substantial potential for practical implementation in asphalt pavements.

A review of phase change materials in asphalt binder and asphalt mixture

Application of phase change material in asphalt mixture – A review

The State of the Art on Phase Change Material-Modified Asphalt Pavement

Preparation and Experimental Study of Phase Change Materials for Asphalt Pavement

Effect of polyethylene glycol/polyacrylamide graft copolymerizaton phase change materials on the performance of asphalt mixture for road engineering

Assessment of high-enthalpy composite eutectic phase change materials efficiency in asphalt binders for cooling pavements

Study on preparation and thermal performance improvements of composite phase change material for asphalt steel bridge deck

Evaluation of the Interaction and Aging Behavior for Asphalt Binders with Epoxy Resin and Phase Change Materials

Investigation on Thermo-Rheological Properties and Stability of Sbr Modified Asphalts Containing Palygorskite Clay

Temperature responses of asphalt pavement structure constructed with phase change material by applying finite element method

Effects of Polyethylene Glycol/Porous Silica Form-Stabilized Phase Change Materials on the Performance of Asphalt Binders

A novel solid–solid phase change material used to temperature regulation in asphalt mixture: preparation and properties

Effect of two organic phase change materials on the thermal performance of asphalt pavements

An Overview of Phase Change Materials and Their Applications in Pavement

Preparation of polyurethane solid-solid low temperature PCMs granular asphalt mixes and study of phase change temperature control behavior

Influence of low-temperature polyurethane solid-solid PCMs particles on the pavement performance of asphalt mixtures

Low-Temperature Performance of Asphalt Mixtures Modified by Microencapsulated Phase Change Materials with Various Graphene Contents

Impregnation of Lightweight Aggregate Particles with Phase Change Material for Its Use in Asphalt Mixtures

Preparation and Performance Analysis of Ceramsite Asphalt Mixture with Phase-Change Material

Aging-Related Cooling Performance Evaluation and Fabrication Conditions Optimization for Alkane-Based Phase Change Microcapsule-Modified Asphalt

Design and properties of polyurethane solid–solid phase-change granular temperature regulation asphalt mixtures