Abstract:We analyze progressive damage and failure of composite laminates by using a micromechanical bridging model and compare numerical and experimental results for three fracture problems, namely, the four-point bending, the simple tension, and the simple tension of a laminate with an open hole at its centroid. These problems involve fiber–matrix interface debonding, constituents’ damage, interlayer delamination, and localized damage due to stress concentration. Macroscopic constitutive equations of unidirectional lamina, derived from those of the fiber and the matrix by using the bridging model with the fiber material assumed to be linearly elastic and the matrix to be elasto-plastic obeying the Drucker–Prager yield criterion, are employed. Strains in each constituent of the composite are assumed to be infinitesimal for the additive decomposition of strains into elastic and plastic parts to be valid, and the incremental plasticity theory is used. Stresses in the two constituents are found from their values in the homogenized material by using a dehomogenization technique. The intra-layer damage is assumed to initiate at a material point when the failure criterion for either the fiber or the matrix is satisfied. Young’s modulus of a constituent is degraded by following a Weibull distribution. A finite element is deleted when an energy-based failure criterion is satisfied in it, and the analysis is continued till the structure fails. The delamination between adjacent plies is simulated by including a thin resin layer at the interface and studying failure initiation and propagation in it. The computed reaction force versus the displacement curves and the failure patterns in the three problems are found to agree with the corresponding experimental data.

Construction of a micromechanics-based intralaminar mesomodel, and illustrations in ABAQUS/Standard

Progressive failure analysis of 2D woven composites at the meso-micro scale

Continuum Damage Modeling and Progressive Failure Analysis of Carbon Fiber/epoxy Composite Pressure Vessel

Micromechanics-based Progressive Failure Analysis of Carbon FIber/epoxy Composite Vessel under Combined Internal Pressure and Thermomechanical Loading

A micromechanics-based interface mesomodel for virtual testing of laminated composites

Meso-Scale Damage Modeling of Hybrid 3D Woven Orthogonal Composites under Uni-Axial Compression

A Micromechanics-Based Degradation Model for Composite Progressive Damage Analysis

Finite Element Analysis of a Modified Progressive Damage Model for Composite Laminates under Low-Velocity Impact

Finite Element Modelling of Complex 3D Static and Dynamic Crack Propagation by Embedding Cohesive Elements in Abaqus

Micromorphic Constitutive Equations with Damage Applied to Metal Forming

Mesoscale Model for Composite Laminates: Verification and Validation on Scaled Un-notched Laminates

An efficient micromechanics-based finite element model for failure analysis of laminated composites

Bmanc-A Versatile Software for Failure Analysis of a Composite Structure Essentially Upon Original Constituent Properties

Micromechanical Analysis of Mechanical Response for Unidirectional Fiber-Reinforced Plies

Finite Element Analysis of Progressive Failure and Strain Localization of Carbon Fiber/Epoxy Composite Laminates by ABAQUS

Micromechanics-based Multiscale Progressive Failure Simulation of 3D Woven Composites under Compressive Loading with Minimal Material Parameters

Implementation of multiscale mechanisms in finite element analysis of active composite structures

Mixed-mode failure of interfaces studied by the 2D linear elastic–brittle interface model: Macro- and micro-mechanical finite-element applications in composites

Mesoscale Modelling of Progressive Damage and Failure in Single-Lap and Double-Lap Thin-Ply Laminated Composite Bolted Joints

Phase Field Modelling of Microscopic Failure in Composite Laminates

Micromechanical Progressive Damage Analysis of Inter- and Intra-Layer Failures in Fiber-Reinforced Composite Laminates