Abstract:INTRODUCTION AND OBJECTIVES: Virtual BasketTM , Bubble BlastTM , and Vapor TunnelTM are three laser pulse modulation technologies that modify the holmium: yttrium-aluminum-garnet (Ho:YAG) laser pulse transmission through the creation of bubbles emerging from the fiber tip with different effects on the target stone. The primary outcome of the current study was to test the stone ablation rates for the different pulse modulation modes, Virtual Basket, Bubble Blast, and Vapor Tunnel, using different power, energy, and frequency settings.MATERIALS AND METHODS: Quanta Cyber: Ho 150 WTM , a 365 µm PrecisionTM fiber, and hard and soft phantom BegoStonesTM were used in an in vitro experimental configuration in a saline bath. In the Virtual Basket mode, the combinations of power, energy and frequency were tested; 10 W = 0.5 J × 20 Hz, 10 W = 0.5 J × 20 Hz, 60 W = 1 J × 60 Hz and 60 W = 2 J × 30 Hz. In the Bubble Blast mode, the combinations, 12 W = 1.2J × 10 Hz, 60 W = 1.2J × 50 Hz and 60 W = 2 J × 30 Hz, were tested. Similarly, the combination of 10 W = 0.5 J × 20 Hz was tested with Vapor Tunnel mode. High-speed camera captures of the bubble formation and regular photographs of the fragmentation pattern were also taken for each mode.RESULTS: High power lithotripsy was faster and related to higher ablation rates. The Virtual Basket, Bubble Blast, and Vapor Tunnel modalities showed different ablation rates for the same energy and frequency settings. For hard stones, there was an improvement in the ablation rate using 60 W = 2 J × 30 Hz compared with 60 W = 1 J × 60 Hz and 60 W = 1.2 J × 50 Hz. The highest ablation rates were recorded using the Virtual Basket mode with the high-power settings of 2 J of energy and 30 Hz of frequency.CONCLUSIONS: The Virtual BasketTM pulse-modulation technology was related to the highest ablation rates for both hard and soft stones, compared to the Bubble BlastTM and the Vapor TunnelTM technologies in high-power and low-power lithotripsy respectively. For the same high power settings, higher energy seems to provide higher ablation rates.

Vapor Channel Oscillations in Laser Lithotripsy

A Discharge-Excited Srbr2 Vapour Laser

Safety of a Novel Thulium Fiber Laser for Lithotripsy: an in Vitro Study on the Thermal Effect and Its Impact Factor.

Dissimilar cavitation dynamics and damage patterns produced by parallel fiber alignment to the stone surface in holmium:yttrium aluminum garnet laser lithotripsy

Lasers for Lithotripsy

Stone ablation rates using innovative pulse modulation technology: Vapor tunnel, virtual basket, and bubble blast. An in vitro experimental study

Real‐time guidance of thermal and ultrashort pulsed laser ablation in hard tissue using inline coherent imaging

Interstitial Optical Monitoring of Focal Laser Ablation

Application of pulse laser induced vapor bubbles and shock waves to neurosurgery

Dynamics of Ultrafast Laser Ablation of Water

Temperature changes during laser lithotripsy with Ho:YAG laser and novel Tm-fiber laser: a comparative in-vitro study

Optical probing of ultrafast laser-induced solid-to-overdense-plasma transitions

Laser Etching Processes : Towards Sub-Picosecond X-UV Irradiation

Laser–Material Interactions of High-Quality Ultrashort Pulsed Vector Vortex Beams

Process Choreography Modelling

Laser-Induced Focused Ultrasound for Cavitation Treatment: Toward High-Precision Invisible Sonic Scalpel

Long-Pulse Laser-Induced Cavitation: A Race Between Advection and Phase Transition

Identification of HLA-A 3-restricted Cytotoxic T Lymphocyte Epitopes from Carcinoembryonic Antigen and HER-2 / neu by Primary in Vitro Immunization with Peptide-pulsed Dendritic Cells 1

Towards a Model-driven Development of Web Applications

Laser beam properties and microfluidic confinement control thermocavitation

Vector vortex beams generated by q-plates as a versatile route to direct fs laser surface structuring