Abstract:Fiber reinforced thermoplastic composite bars offered the advantages of repeated molding, high toughness, and recyclability, making them a promising alternative to steel bars. For the stirrups applications in concrete structures, it was essential to develop efficient bending technologies for producing high-quality thermoplastic bending bars. In the present paper, the bending properties of glass fiber reinforced polypropylene (GFRPP) composite bars were investigated by experimental and theoretical methods. A novel bending fixture of GFRPP bars was specifically designed for GFRPP bars to ensure the reliable bending of the bars. Finite element simulation was employed to analyze the stress distribution of GFRPP bars, providing valuable insights into their mechanical behavior. Additionally, a bending strength model was developed based on the material mechanics, offering a theoretical framework for understanding and predicting the bending strength of GFRPP bars. Finally, the bending mechanism of bars was further revealed according to experimental and theoretical findings. The results of the study demonstrated that the specially designed bending fixture was successful in minimizing damage to the bending section of the GFRPP bars, leading to a significant improvement in bending strength retention of up to 43.2 %. Furthermore, the theoretical results and experimental test have a good agreement in terms of stress distribution and failure mode. The maximum strain in the transition zone between the straight section and the bending section of the GFRPP bars was nearly double that of the straight section at the same stress levels. With the increase of bending radius to diameter ratio from 3.0 to 7.0, the tensile strength of GFRPP bending bars increased by similar to 7.9 %. The study identified the transition area between the bending section and straight section of GFRPP bars as the most critical failure point. The strength degradation mechanism during the bending were attributed to the shrinkage and torsion of inner fibers owing to the compression caused the local stress concentration, which caused the inner resin matrix to crack and interface debonding of fiber/resin, leading to the premature tensile failure.

Flexural reinforcement of wood plastic composite panels by bonding glass fiber reinforced polymer sheets and embedding bars

Study on flexural property of glass fiber-reinforced polymer reinforced wood–plastic composite panels

Pull-Out Behavior of CFRP Bars in Glued-In Glubam Joints

Study on Bending Creep Performance of GFRP-Reinforced PVC-Based Wood-Plastic Composite Panels

A Review on Flexural Properties of Wood-Plastic Composites

Flexural Properties of Surface Reinforced Wood/Plastic Deck Board

Axial compressive properties of GFRP-reinforced PVC-based glued wood-plastic composites column

Constructing a rigid-flexible grid structure for simultaneously strengthening and toughening bamboo flour/plastic composites through the introduction of continuous carbon fabric meshes via multi-layer co-extrusion

Flexural performances of prestressed high strength concrete piles reinforced with hybrid GFRP and steel bars

Experimental Study of the Flexural and Compression Performance of an Innovative Pultruded Glass-Fiber-Reinforced Polymer-Wood Composite Profile

STRUCTURAL ASSESSMENT OF LAMINATED WOOD VENEER/PLASTIC SHEET COMPOSITES USED AS BUILDING MATERIAL

Flexural Performances of Pre-Stressed Concrete Piles Reinforced with Hybrid BFRP and Steel Bars

Flexural Experiment and Design Method of Steel-Wire-Enhanced Insulation Panels

Flexural behaviors of GFRP-wood sandwich beams with recycled wood formwork cores

Design, Preparation and Mechanical Properties of Novel Glass Fiber Reinforced Polypropylene Bending Bars

Flexural performance of precast geopolymer concrete sandwich panel enabled by FRP connector

Flexural property study of multiaxial fiber reinforced polymer sandwich panels with pultruded profile cores

Development of Basalt Fiber Reinforced Wood-Plastic Composite Materials

Analytical and experimental study on flexural behavior of pultruded fibre reinforced polymer sheet piles

Fiber Reinforced Composites Sandwich Panels with Web Reinforced Wood Core for Building Floor Applications

Mechanical properties of extruded continuous glass fiber reinforced wood Particle/HDPE composites: Effects of glass bundle tex and arrangement