Abstract:A micromixer is an important component of microfluidic systems, which reveals wide and essential applications in the field of chemistry and biochemistry. In the micro scale, diffusive mixing is notoriously slow as fluid is in the form of laminar flow. Therefore, design of a high performance micromixer to mix fluids at short distance is essential for a successful development of microfluidic systems. A novel three-dimensional micromixer, which composed of several units of three dimensional asymmetric arc structures, was proposed. Mixing experiments and numerical studies were carried out and the experimental results showed a good agreement with the simulation results. For the normal fluid (viscosity is 9.7x10(-4) kg/ms and diffusivity is 3.6x10(-10) m(2)/s), the complete mixing lengths are less than 2 mm at the inlet velocity from 1.9x10(-4) m/s to 2.9 m/s. The complete mixing length gradually increases from 350 mu m to 2000 mu m when inlet velocity increases from 1.9 x 10(-4) m/s to 1.9 x 10(-2) m/s. However, the complete mixing length decreases to 700 mu m while the inlet velocity continues increasing to 2.9m/s. The inlet velocity of 1.9x10(-2) m/s is considered as a critical inlet velocity, where more chaotic advection occurs to enhance the mixing performance and reduce the complete mixing length when the inlet velocity is bigger than the critical value. For the fluid with viscosity of 0.186 kg/ms and diffusion rate of 9 x10(-13)m(2)/s, no chaotic advection occurs and the complete mixing lengths are around 2200 mu m at the inlet velocity from 3.7x10(-3)m/s to 3.7m/s. The results show that this novel micromixer has extremely short mixing length even for difficult mixing fluids.

Design and Analysis of a Chaotic Micromixer with Vortices Modulation

Numerical simulation of fluid mixing reinforcement in micro-mixers with barriers embedded

Theoretical And Experimental Aanalysis Of Chaotic Mixing Efficiency Of Plug Flow In Different Geometry

Staggered Oriented Ridges Micromixer Based on Chaotic Advection

A Novel Passive Micromixer with Modified Asymmetric Lateral Wall Structures

Analysis on Chaotic Mixing Inside a Plug and Determination of Lagrangian Velocity

Design and Evaluation of Three-Dimensional Zigzag Chaotic Micromixers for Biochemical Applications

Using CFD and Machine Learning to Explore Chaotic Mixing in Laminar Diameter-Transformed Stirred Tanks

Numerical and Experimental Investigations of Chaotic Mixing Behavior in an Oscillating Feedback Micromixer

Numerical Analysis on a Passive Chaotic Micromixer with Helical Microchannel

Design and Evaluation of an Easily Fabricated Micromixer with Three-Dimensional Periodic Perturbation

Numerical study of a novel electroosmotic active micromixer with twin diamond-shaped chambers and sawteeth

Chaotic Mixing in a Steady Flow in a Microchannel

Experimental and Numerical Research on the Flow in Microchannel with Barriers

Surface Tension Driven and 3-D Vortex Enhanced Rapid Mixing Microchamber

An Enhanced Electroosmotic Micromixer with an Efficient Asymmetric Lateral Structure.

A Three-Dimensional Vortex Microsystem Designed and Fabricated for Controllable Mixing

Numerical Simulation on Fluid Mixing by Effects of Geometry in Staggered Oriented Ridges Micromixers

Analysis of Optimal Mixing in Open-Flow Mixers with Time-Modulated Vortex Arrays

A Novel Passive Three-Dimensional Asymmetric Arc Micromixer Based On The Concept Of Chaotic Advection And Unbalanced Splitting-Collision

Passive and Active Mixing in Microfluidic Devices