Abstract:Purpose This paper aims to compare the performance of flow pulsation versus flow stirring in the context of mixing of a passive scalar at moderate Reynolds numbers in confined flows. This comparison has been undertaken in two limits: diffusion can be neglected as compared to convection (very large Peclet) and diffusion and convection effects are comparable. The comparison was performed both in terms of global parameters: pumping power and mixing efficiency and local flow topology. Design/methodology/approach The study has been addressed by setting up a common conceptual three-dimensional problem that consisted of the mixing of two parallel streams in a square section channel past a square section prism. Stirring and pulsation frequencies and amplitudes were changed and combined at an inlet Reynolds number of 200. The numerical model was solved using a finite volume formulation by adapting a series of open-source OpenFOAM computational fluid dynamic (CFD) libraries. For cases with flow pulsation, the icoFoam solver for laminar incompressible transient flows was used. For cases with stirring, the icoDyMFoam solver, which uses the arbitrary Lagrangian–Eulerian method for the description of the moving dynamical mesh, was used to model the prism motion. At the local flow topology level, a new method was proposed to analyze mixing. Time evolution of folding and wrinkling of sheets made up of virtual particles that travel along streak lines was quantified by generating lower rank projections of the sheets onto the spaces spanned by the main eigenvectors of an appropriate space-temporal data decomposition. Findings In the limit when convection is dominant, the results showed the superior performance of stirring versus flow pulsation both in terms of mixing and required pumping power. In the cases with finite Peclet, the mixing parameters by stirring and flow pulsation were comparable, but pulsation required larger pumping power than stirring. For some precise synchronization of stirring and pulsation, the mixing parameter reached its maximum, although at the expense of higher pumping power. At the local flow topology level, the new method proposed to quantify mixing has been found to correlate well with the global mixing parameter. Originality/value A new systematic comparative study of two methods, stirring and pulsation, to achieve mixing of passive scalars in the mini scale for confined flows has been presented. The main value, apart from the conclusions, is that both methods have been tested against the same flow configuration, which allows for a self-consistent comparison. Of particular interest is the fact that it has been found that accurate synchronization of both methods yields mixing parameters higher than those associated to both methods taken separately. This suggests that it is possible to synchronize mixing methods of a different nature to achieve optimum designs. The new theoretical method that has been proposed to understand the mixing performance at the local level has shown promising results, and it is the intention of the authors to test its validity in a broader range of flow parameters. All these findings could be taken as potential guidelines for the design of mixing processes in the mini scale in the process industry.

Analysis of Optimal Mixing in Open-Flow Mixers with Time-Modulated Vortex Arrays

Numerical simulation of fluid mixing reinforcement in micro-mixers with barriers embedded

Numerical Simulation on Fluid Mixing by Effects of Geometry in Staggered Oriented Ridges Micromixers

Theoretical And Experimental Aanalysis Of Chaotic Mixing Efficiency Of Plug Flow In Different Geometry

Flow analysis for efficient design of wavy structured microchannel mixing devices

Numerical Simulation of the Efficiency of Mixing in Heterogeneous Microchannels with Patterned Surface Potentials

Analysis of vortex mixing in passive micromixers with misaligned inlet and rectangular winglets

Experimental and Numerical Study on Flow Resistance and Bubble Transport in a Helical Static Mixer

A Computational Study of Mixing Microchannel Flows

An Investigation of Flow Patterns and Mixing Characteristics in a Cross-Shaped Micromixer within the Laminar Regime

Numerical simulation of microfluidic mixing by ultrasonic-induced acoustic streaming

Numerical Investigation of Flow Patterns and Mixing Characteristics in a 3D Micromixer with Helical Elements over Wide Reynolds Numbers

Design and Analysis of a Chaotic Micromixer with Vortices Modulation

Numerical Analysis of Mixing Enhancement for Micro-Electroosmotic Flow

Effect of Vortex on Mass Transport and Mixing in Microcapillary Channels

Comparison of three-dimensional flow mixing via pulsation and dynamical stirring: application to the mixing of parallel streams at different temperatures

Analysis of Entropy Generation for Mass and Thermal Mixing Behaviors in Non-Newtonian Nano-Fluids of a Crossing Micromixer

Study of a Novel Method to Weaken the Backmixing in a Multi-Inlet Vortex Mixer

Numerical algorithms and simulations of boundary dynamic control for optimal mixing in unsteady Stokes flows

Frequency Dependence and Frequency Control of Microbubble Streaming Flows

Optimization Analysis of the Staggered Herringbone Micromixer Based on the Slip-Driven Method