Abstract:In this paper a hybrid solution to the problem of robots climbing on featureless surface is presented. The research focus of wall climbing robot is on the adhesion and the mechanism of locomotion. An efficient, robust, standalone and scalable mechanism is often desired for such robots to perform many critical tasks. The performance of electrostatic adhesion can be enhanced by using flexible and soft elastic material as the dielectric to improve its resistance against peeling force. A novel multiple stage fabrication process of the layered hybrid adhesive using blade coating technique is proposed in this work. This yields a track structure that is compliant on the surface, electrically functional, and geometrically controllable. When excited by high voltage, the track becomes an active actuator. It also passively adheres to smooth surfaces with the elastomer effect. Inspired by the climbing strategy of the gecko, a solution for track locomotion is proposed by utilizing electrostatic, elastomer adhesion and tail forces simultaneously. The biomimetic tail is implemented with torsion spring design. As a result, the robot prototype ELAD (electrostatic and elastomer adhesion) can climb a slope of 80° on smooth surfaces at speed of 4cm/s, and perch for more than 2h using on-board power. Effects of tail design and hybrid adhesion with force analysis are numerically evaluated and presented. It is also demonstrated that the elastomer material properties for the hybrid adhesive are suitable for stable climb on vertical surfaces. Further, analysis has shown that the hybrid adhesive is able to work on surfaces with roughness value Ra within 300nm.

The Problem of Adhesion Methods and Locomotion Mechanism Development for Wall-Climbing Robots

Research Status and Development Trend of Wall Climbing Robot

A Locomotion Mechanism for a Mobile Wall-Climbing Robot with a Hybrid Magnetic-Tape Adhesion Method

A Novel Wall Climbing Robot Based on Bernoulli Effect

Design of Permanent Magnetic Wheel-Type Adhesion-Locomotion System for Water-Jetting Wall-Climbing Robot

Hybrid electrostatic and elastomer adhesion mechanism for wall climbing robot

Survey on Bioinspired Adhesive Methods and Design and Implementation of A Multi-Mode Biomimetic Wall-Climbing Robot.

Development of a wheeled wall‐climbing robot with an internal corner wall adaptive magnetic adhesion mechanism

Analysis and Optimization of the Wall-Climbing Robot with an Adsorption System and Adhesive Belts

Design and Technical Development of Wall-Climbing Robots: A Review

A Biomimetic Wheel-Track Wall-Climbing Robot Based on Rolling Adsorption Mechanism

Modeling and Analysis of Magnetic Adhesion Module for Wall-Climbing Robot

Design and Development of Wall Climbing Robot

Permanent Magnetic System Design for the Wall-Climbing Robot

Optimization design and experimental research on magnetic components for wall-climbing robot

Research on a wall climbing robot based on electrostatic adhesion

Overview of the Current Status and Development Trend of Wall-climbing Robots

Design and analysis of wheel-tracked composite magnetic adsorption wall-climbing robot

A magnetic wall climbing robot with non-contactable and adjustable adhesion mechanism

Design, Modeling and Experimentation of a Biomimetic Wall-climbing Robot for Multiple Surfaces

Design analysis of electro-adhesive mechanism for wall-climbing robot