Abstract:Purpose The project Climbing Robot Cell for Fast and Flexible Manufacture of Large Scale Structures seeks to modernise and take into the future the technology of the manufacture of large fixed welded structures. It creates a transportable manufacturing cell consisting of a team of cooperating climbing robot work tools whose activities are coordinated and integrated through a central intelligence. The purpose of this paper is to present a wheeled robot, called NDT robot, designed for the real time inspection of long weld lines simultaneously with the welding process. Design/methodology/approach Neodymium permanent magnets are used for adhesion, which are capable of producing a maximum adhesion pressure of 4 × 104 Nm −2 at a 20 mm air gap. The strong neodymium magnets give the robot a high payload carrying capability. The arrangement of the magnet array increases its performance at large air gaps so that the robot has excellent capability to overcome obstacles, such as weld caps. The design of the wheeled robot with two sections jointed by a hinge joint has the advantage of high speed and good manoeuvrability, as well as working on curved surfaces and transferring between angled adjoining surfaces. Findings The NDT robot has been developed with the capability of climbing on steel walls carrying the specified payload and the ability to overcome the obstacles. The robot is also able to climb on curved surfaces with excellent manoeuvrability, and transfer between angled adjoining surfaces. Originality/value The arrangement of the magnet array enables the robot to retain a strong holding force at big air gap, so that the ability of the robot to overcome obstacles and work on curvatures is strengthened. The two‐section design improves the robot's performance on curvatures and enables it to transfer between angled adjoining surfaces.

Development of a Wheeled Wall-Climbing Robot with a Shape-Adaptive Magnetic Adhesion Mechanism

Design of Permanent Magnetic Wheel-Type Adhesion-Locomotion System for Water-Jetting Wall-Climbing Robot

Development of a wheeled wall‐climbing robot with an internal corner wall adaptive magnetic adhesion mechanism

Design and Performance Analysis of a Tracked Wall-Climbing Robot for Ship Inspection in Shipbuilding

Design of a Curved Surface Adaptive Permanent Magnet Wall Climbing Robot

Symmetrically Centralized Magnetic-Wheel Unit For Wall-Climbing Robots

Design and Analysis of Novel Wall-Climbing Robot on Discontinuous Ferromagnetic Surface

DESIGN AND OPTIMIZATION OF MECHANICAL STRUCTURES FOR WALL-CLIMBING ROBOTS

A magnetic wall climbing robot with non-contactable and adjustable adhesion mechanism

Optimization design and experimental research on magnetic components for wall-climbing robot

Design and analysis of a passive adaptive wall-climbing robot on variable curvature ship facades

A Biomimetic Wheel-Track Wall-Climbing Robot Based on Rolling Adsorption Mechanism

Analysis and Simulation of Permanent Magnet Adsorption Performance of Wall-Climbing Robot

A Locomotion Mechanism for a Mobile Wall-Climbing Robot with a Hybrid Magnetic-Tape Adhesion Method

Development of a wall-climbing robot using a tracked wheel mechanism

Modeling and Analysis of Magnetic Adhesion Module for Wall-Climbing Robot

Development of a climbing robot for inspection of long weld lines

Self-compliant Track-type Wall-climbing Robot for Variable Curvature Facade

Permanent Magnetic System Design for the Wall-Climbing Robot

Design and Optimization of the Wall Climbing Robot for Magnetic Particle Detection of Ship Welds

Optimization Design and Trajectory Error Compensation of a Facade-Adaptive Wall-Climbing Robot