Abstract:Lateral structure photodetectors based only on formamidinium lead triiodide perovskite active material still present moderate performance and poor stability. Herein, a strategy to effectively improve the photosensitive performance, ambient stability, and flexibility performance of the formamidinium‐based perovskite photodetector by employing high‐mobility small organic molecule semiconductor modification is proposed. Organic–inorganic hybrid perovskite has attracted extensive research due to its excellent optoelectronic properties and is a competitive candidate material for a new generation of photodetectors. However, lateral structure photodetectors based only on perovskite active materials still present moderate performance and poor stability. Herein, lateral structure formamidinium‐based perovskite FA0.9Cs0.1PbI3 photodetectors are reported which are modified by a solution‐processed organic semiconductor 2,7‐dioctyl[1]benzothieno[3,2‐b][1]benzothiophene (C8‐BTBT) layer for improved photosensitive performance and ambient/flexibility stability. High‐mobility organic semiconductor C8‐BTBT serves as an efficient hole transport layer that fills the grain boundaries and gaps of the FA0.9Cs0.1PbI3 film, enabling rapid extraction and transport of the photo‐generated carriers from the perovskite to the electrodes, resulting in enhanced photosensitive performance of the photodetector. Compared with the original device, the C8‐BTBT‐modified photodetector exhibits dramatically improved performance with a best responsivity of 1278 mA W−1, specific detectivity of 1.58 × 1012 Jones, external quantum efficiency of 298%, and fall time of 14.09 ms, which is 10.84 times less than 152.76 ms of the pure perovskite device. Moreover, the C8‐BTBT film acts as a protective layer for the FA0.9Cs0.1PbI3 film because of its good air stability and effective coverage, which significantly improves the ambient stability of the perovskite photodetector compared with the original device, increasing photocurrent retention from 2.5% to 61.5% or 81.5% at different humidity after 6 days. Furthermore, the C8‐BTBT‐modified perovskite photodetector exhibits outstanding flexibility performance, with only a 5% reduction in photocurrent under bending and almost no change after 200 bending cycles, while those of the pristine perovskite device have degraded to ≈80% and ≈75% under the same conditions, respectively. This study provides a facile and effective solution‐processed‐based strategy for constructing high‐performance and stable perovskite photodetectors.

Enhanced On–Off Ratio for Ni(OH) 2 ·0.75H 2 O-MAPbBr 3 -Based Photodetectors

Homologous Bromides Passivation of CH 3NH 3pbbr 3 Single Crystals for Photodetectors with Improved Properties

High-Detectivity and Stable Planar MAPbI₃/IDT-BT Photodetectors with Assisted MoO₃ Interlayer

Large-Area Periodic Organic-Inorganic Hybrid Perovskite Nanopyramid Arrays for High-Performance Photodetector and Image Sensor Applications

High-Detectivity and Stable Planar MAPbI3/IDT-BT Photodetectors With Assisted MoO3 Interlayer

Hybrid Field-Effect Transistors and Photodetectors Based on Organic Semiconductor and CsPbI3 Perovskite Nanorods Bilayer Structure

Ultrasensitive Photodetectors Based on Island-Structured CH3NH3PbI3 Thin Films.

Enhancement of perovskite photodetector using MAPbI3 with formamidinium bromide

Perovskite Photodetectors Based on p-i-n Junction With Epitaxial Electron-Blocking Layers

Additive Modulated Perovskite Microstructures for High Performance Photodetectors

High performance UV–vis–NIR photodetectors based on ZnO/organic–inorganic Sn–Pb hybrid perovskite heterojunction

High‐Performance MAPbI3/PM6:Y6 Perovskite/Organic Hybrid Photodetectors with a Broadband Response

High-Efficiency and Stable Perovskite Photodetectors with an F4-TCNQ-Modified Interface of NiOx and Perovskite Layers

High-Performance Planar-Type Photodetector on (100) Facet of MAPbI 3 Single Crystal

In Situ Surface Modification Enables High Stability and Optoelectrical Performance for a Self‐powered Photodetector

High-Performance Planar-Type Photodetector on (100) Facet of MAPbI3 Single Crystal

Hybrid Organolead Halide Perovskite Microwire Arrays/single CdSe Nanobelt for a High-Performance Photodetector

Mixed-Cation Halide Perovskite Doped with Rb+ for Highly Efficient Photodetector

BEHAVIORS OF PHOTOCONDUCTIVE DETECTORS BASED ON MAPbI(3) PEROVSKITE FILMS

A Design Strategy for Low‐Cost Single/Dual‐Band Photodetector: Bulk Heterojunction and Interface Engineering

Performance Improvement of Formamidinium‐Based Perovskite Photodetector by Solution‐Processed C8‐BTBT Modification