Mixed-Cation Halide Perovskite Doped with Rb+ for Highly Efficient Photodetector

Wei Wu,Yang Liu,Jianxi Yao,Xiaoping Ouyang
DOI: https://doi.org/10.3390/ma16103796
IF: 3.4
2023-05-18
Materials
Abstract:Photodetectors are widely employed as fundamental devices in optical communication, automatic control, image sensors, night vision, missile guidance, and many other industrial or military fields. Mixed-cation perovskites have emerged as promising optoelectronic materials for application in photodetectors due to their superior compositional flexibility and photovoltaic performance. However, their application involves obstacles such as phase segregation and poor-quality crystallization, which introduce defects in perovskite films and adversely affect devices' optoelectronic performance. The application prospects of mixed-cation perovskite technology are significantly constrained by these challenges. Therefore, it is necessary to investigate strategies that combine crystallinity control and defect passivation to obtain high-quality thin films. In this study, we incorporated different Rb+ ratios in triple-cation (CsMAFA) perovskite precursor solutions and studied their effects on crystal growth. Our results show that a small amount of Rb+ was enough to induce the crystallization of the α-FAPbI3 phase and suppress the formation of the yellow non-photoactive phase; the grain size increased, and the product of the carrier mobility and the lifetime (μτ) improved. As a result, the fabricated photodetector exhibited a broad photo-response region, from ultraviolet to near-infrared, with maximum responsivity (R) up to 11.8 mA W−1 and excellent detectivity (D*) values up to 5.33 × 1011 Jones. This work provides a feasible strategy to improve photodetectors' performance via additive engineering.
materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
What problem does this paper attempt to address?
The problem that this paper attempts to solve is the challenges faced by mixed - cation perovskite materials in photodetector applications. Specifically, the application of mixed - cation perovskite materials in photodetectors is hindered by phase separation and poor crystal quality, which can introduce defects and thus affect the optoelectronic performance of the device. To overcome these challenges, the authors studied the improvement of the crystallization process and defect passivation effect of the tri - cation (CsMAFA) perovskite precursor solution by doping different proportions of rubidium ions (Rb⁺). ### Main problems 1. **Phase separation**: Mixed - cation perovskite materials are prone to phase separation during the preparation process, leading to the formation of inactive phases, which will affect the optoelectronic performance of the device. 2. **Poor crystal quality**: The crystal quality of the mixed - cation perovskite thin films is relatively poor, with problems such as small grain size and many grain boundaries, which will lead to an increase in non - radiative recombination centers and a decrease in carrier lifetime and mobility. 3. **Defects**: Phase separation and poor crystal quality will lead to various defects in the thin films, such as pinholes, cracks and grain boundaries. These defects will act as non - radiative recombination centers and further reduce the performance of the device. ### Solutions The authors studied the effect of doping different proportions of rubidium ions (Rb⁺) in the tri - cation perovskite precursor solution on crystal growth. The experimental results show that an appropriate amount of rubidium ions can: - Promote the crystallization of the α - FAPbI₃ phase and inhibit the formation of the inactive yellow phase. - Increase the grain size and reduce the number of grain boundaries, thereby reducing non - radiative recombination centers and increasing the carrier mobility and lifetime. - Improve the quality of the thin film and improve the performance of the photodetector. ### Experimental results - **Optical response range**: The prepared photodetectors have a wide optical response range from ultraviolet to near - infrared. - **Maximum responsivity**: The maximum responsivity (R) reaches 11.8 mA/W. - **Detection rate**: The highest detection rate (D*) reaches 5.33×10¹¹ Jones. - **On - off ratio**: The maximum on - off ratio reaches 7252. - **Response time**: The rise time and fall time are 208.3 μs and 288.4 μs respectively, showing an ultrafast response speed. ### Conclusion By doping an appropriate amount of rubidium ions, the authors successfully prepared high - quality mixed - cation perovskite thin films and significantly improved the performance of photodetectors. These results verify the potential of perovskite materials in the field of high - performance photodetectors.