Facile strategy to prepare polyimide nanofiber assembled aerogel for effective airborne particles filtration

Shiya Qiao,Shuai Kang,Jing Zhu,Yan Wang,Junrong Yu,Zuming Hu

DOI: https://doi.org/10.1016/j.jhazmat.2021.125739

IF: 13.6

2021-08-01

Journal of Hazardous Materials

Abstract:<p>Polyimide nanofiber (PINF) aerogel materials have received extensive attention as heat insulation, sensors and filtration media due to their excellent thermodynamic properties and unique porous structure. However, PINF must be difficult to disperse in organic solvents (dioxane or dimethyl sulfoxide) and dimensional instability has been regarded as issues that limits the preparation of PINF aerogels, especially in the water. So, it is of great significance to prepare polyimide aerogels with stable structure using water as a dispersant. In this work, the electrospun polyimide nanofiber precursor (polyamic acid (PAA) nanofiber (PAANF)) is uniformly dispersed in water, and triethylamine is added to terminated PAA oligomer as a binder. The resultant PINF aerogel has excellent mechanical properties with outstanding elasticity and a maximum compressive stress of 7.03 kpa at 50% strain. Furthermore, due to the extremely high porosity (98.4%) and hierarchical porous structure, the aerogel exhibits a high filtration efficiency (99.83%) for PM2.5, while the pressure drop is lower than that of the corresponding nanofiber membrane materials, which will facilitate its application in high temperature filtration and other fields.</p>

environmental sciences,engineering, environmental

What problem does this paper attempt to address?

The main problem this paper attempts to address is the preparation of polyimide nanofiber aerogels (PINF aerogel) with stable structures and excellent mechanical properties, particularly achieving this through the use of water as a dispersant. Polyimide nanofibers (PINF) have garnered extensive attention in fields such as thermal insulation, sensors, and filtration media due to their outstanding thermodynamic properties and unique porous structures. However, PINF is difficult to disperse in organic solvents and has poor dimensional stability, which limits the preparation of PINF aerogels, especially in water. Therefore, the focus of the research is to develop a simple method to prepare PINF aerogels with stable structures and excellent mechanical properties using water as a dispersant.

Specifically, the researchers prepared polyamic acid nanofibers (PAANF) through electrospinning and uniformly dispersed them in water. They added triethylamine (TEA) to terminate the PAA oligomers as a binder, successfully preparing PINF aerogels. These aerogels not only exhibit excellent mechanical properties, such as high elasticity and a maximum compressive stress of 7.03 kPa (at 50% strain), but also achieve a PM2.5 filtration efficiency of 99.83% due to their extremely high porosity (98.4%) and hierarchical porous structure, while the pressure drop is lower than that of the corresponding nanofiber membrane materials. These characteristics make their application in high-temperature filtration and other fields possible.