Abstract:A random aggregate (RA) model consisting of mortar, aggregate, and the interfacial transition zone (ITZ) was established to investigate the effect of existing cracks on the tensile properties of concrete. Based on this, a method for establishing a geometric model of cracked concrete was proposed by inserting 0-depth cohesive elements into the RA model. The influence of crack length, width, and area on the tensile properties of concrete were studied using the established cracked concrete model. In addition, the key parameters of bond strength and fracture energy of the mortar and ITZ regions were tested. The cement is ordinary Portland cement with a strength grade of 42.5, and the sand is medium sand. The fracture energy tests were conducted using a displacement-controlled loading model with a loading rate of 0.4 mm/min, while the tensile strength tests were conducted using a stress-controlled loading method with a loading rate of 0.06 MPa/s. The feasibility and accuracy of the numerical method used were verified by comparing the results with those of a finite compression simulation. The numerical results show that as the crack length increases, the tensile strength and elastic modulus of concrete gradually decrease, but if the crack length is 0.47 h, the elastic modulus of concrete shows an abnormal increase. The range of the crack's influence on the tensile performance of concrete is between 50 mm and 100 mm. If the crack width is less than 0.55 mm, the tensile strength of concrete gradually decreases with the increase of crack width, and when the crack width is greater than 0.55 mm, the tensile strength stabilizes.

Macro-meso cracking inversion modelling of three-point bending concrete beam with random aggregates using cohesive zone model

Stochastic Fracture of Concrete Composites: A Mesoscale Methodology

Cohesive Cracking Simulation of Concrete Using Effective Modulus

Effect of Aggregate on Cracking Behaviours of Concrete in Mesoscopic Modeling

Hybrid Phase-Field Modeling of Mesoscopic Failure in Concrete Combined with Fourier-Voronoi Stochastic Aggregate Distribution Modelling Approach

3-D Numerical Modelling of Mesoscopic Configuration and Cracking of Concrete

Mesoscale fracture analysis of three-point bending concrete beams based on cohesive zone model

THREE-DIMENSIONAL MESO-SCALE COHESIVE FRACTURE MODELING OF CONCRETE USING A PYTHON SCRIPT IN ABAQUS

3D meso-scale fracture modelling of concrete with random aggregates using a phase-field regularized cohesive zone model

New concrete cracking model established based on fracture mechanics and damage theory

3 D In-situ XCT Image Based Mesoscale Fracture Modelling and Validation of Concrete Using Voxel Hexahedron Meshing and Damage Plasticity Model

A Mesoscale Modelling Approach Coupling SBFEM, Continuous Damage Phase-Field Model and Discrete Cohesive Crack Model for Concrete Fracture

Mesoscopic modeling and simulation of tensile properties of cracked concrete using cohesive model

Numerical simulation of cracking of early-age concrete three-point beams

Dynamic Fracture Catastrophe Model of Concrete Beam under Static Load

Mechanical properties and numerical simulation of crack interface in reinforced concrete

3D meso-scale fracture modelling and validation of concrete based on in-situ X-ray Computed Tomography images using damage plasticity model

Simulation of Meso-Fracture for Concrete Based on the Developed Random Aggregate Model

Monte Carlo simulation of complex cohesive fracture in random heterogeneous quasi-brittle materials

Finite Element Modelling of Complex 3D Static and Dynamic Crack Propagation by Embedding Cohesive Elements in Abaqus

Mesoscopic discrete modeling of compression and fracture behavior of concrete: Effects of aggregate size distribution and interface transition zone