Abstract:The low carbon footprint, biodegradability, interesting mechanical properties, and relatively low price are considered some of the reasons for the increased interest in polylactic acid-based (PLA-based) filaments supplied with natural fillers. However, it is essential to recognize that incorporating natural fillers into virgin PLA significantly impacts the printability of the resulting blends. The complex inter-relationship between process, structure, and properties in the context of fused deposition modeling (FDM)-manufactured biocomposites is still not fully understood, which thus often results in decreased reliability of this technology in the context of biocomposites, decreased accuracy, and the increased presence of defects in the manufactured biocomposite samples. In light of these considerations, this study aims to identify the optimal processing parameters for the FDM manufacturing process involving wood-filled PLA biocomposites. This study presents an optimization approach consisting of Grey Relational Analysis in conjunction with the Taguchi orthogonal array. The optimization process has identified the combination of a scanning speed of 70 mm/s, a layer height of 0.1 mm, and a printing temperature of 220 °C as the most optimal, resulting in the highly satisfactory combination of good dimensional accuracy (Dx = 20.115 mm, Dy = 20.556 mm, and Dz = 20.220 mm) and low presence of voids (1.673%). The experimentally determined Grey Relational Grade of the specimen manufactured with the optimized set of process parameters (0.782) was in good agreement with the predicted value (0. 754), substantiating the validity of the optimization process. Additionally, the research compared the efficacy of optimization between the integrated multiparametric method and the conventional monoparametric strategy. The multiparametric method, which combines Grey Relational Analysis with the Taguchi orthogonal array, exhibited superior performance. Although the monoparametric optimization strategy yielded specimens with favorable values for the targeted properties, the analysis of the remaining characteristics uncovered unsatisfactory results. This highlights the potential drawbacks of relying on a singular optimization approach.

Enhancing optical transparency of 3D printed PLA parts via multi-response optimization

Advancing optical transparency in 3D‐printed PLA parts using chemical post‐processing

OPTIMIZATION OF ANNEALING AND 3D PRINTING PROCESS PARAMETERS OF PLA PARTS

A response surface methodology investigation into the optimization of manufacturing time and quality for FFF 3D printed PLA parts

On the optimized fused filament fabrication of polylactic acid using multiresponse central composite design and desirability function algorithm

Fused Filament Fabrication 3D Printing Parameters Affecting the Translucency of Polylactic Acid Parts

Investigating the impact of laser polishing parameters on surface roughness, mass ablation rate, and optical transmittance of 3D‐printed PLA substrates

Optimizing Energy Consumption, Surface Quality, and Production Time in Fused Deposition Modeling Based 3D Printing of Polylactic Acid Polymers

Parametric Optimization of FDM Process for PA12-CF Parts Using Integrated Response Surface Methodology, Grey Relational Analysis, and Grey Wolf Optimization

Optimization of printing parameters in fused deposition modeling for improving part quality and process sustainability

Parametric Optimization of 3D Printing Process

Experimental study and optimizing the FDM process using war strategy optimization technique to enhance mechanical properties and surface quality of the PLA thermoplastic

Parametric Optimization of Fused Deposition Modelling (FDM) Process Using PSO Algorithm

Optimizing FDM process parameters: predictive insights through taguchi, regression, and neural networks

Multi-Attribute Decision Making: Parametric Optimization and Modeling of the FDM Manufacturing Process Using PLA/Wood Biocomposites

Multi-Response Optimization of Tensile Creep Behavior of PLA 3D Printed Parts Using Categorical Response Surface Methodology

Impact of process parameters on improving the performance of 3D printed recycled polylactic acid (rPLA) components

Optimization of 3D Printing Parameters for Enhanced Surface Quality and Wear Resistance

Analyzing Surface Roughness Variations in Material Extrusion Additive Manufacturing of Nylon Carbon Fiber Composites

Optimization of Resin Printing Parameters for Improved Surface Roughness Using Metaheuristic Algorithms: A Multifaceted Approach

Optimizing 3D printed diamond lattice structure and investigating the influence of process parameters on their mechanical integrity using nature-inspired machine learning algorithms