Abstract:Fused deposition modelling (FDM) is a popular additive manufacturing process used for rapid prototyping and the production of complex geometries. Despite its popularity, FDM's susceptibility to variations in numerous process parameters can significantly impact the quality, design, functionality, and mechanical properties of 3D printed parts. This study explores thirteen FDM process parameters and their influence on the mechanical properties of polylactic acid (PLA) polymer, encompassing surface roughness, warpage, tensile and bending strength, elongation at break, deformation, and microhardness. The optimum parameters were identified alongside key contributors by applying the Taguchi method, signal-to-noise ratios, and analysis of variances (ANOVA). Notably, specific FDM parameters significantly affect the surface profile, with layer thickness contributing 32.65% and fan speed contributing 8.59% to the observed variations. Similarly, warping values show notable influence from nozzle temperature (29.53%), wall thickness (16.74%), layer thickness (16.56%), and retraction distance (12.80%). Tensile strength is primarily determined by wall thickness (31.83%), followed by infill percentage (26.73%) and infill pattern (16.18%). Elongation at break predominantly correlates with wall thickness (44.82%), with a supplementary contribution from nozzle temperature (10.90%). Microhardness lacks a dominant parameter. Bending strength variations primarily arise from layer thickness (38%), wall thickness (37.6%), and infill percentage (9.17%). Deformation tendencies are influenced by layer thickness (19.20%), print speed (11.37%), wall thickness, and fan speed (10.9% each). The optimized dataset of FDM process parameters was then employed in two prediction models: multiple-regression and artificial neural network (ANN). Evaluation based on the correlation coefficient (R2) and root mean squared error (RMSE) indicates that the ANN model outperforms the multiple-regression approach. The results indicate that precise control of FDM parameters, coupled with ANN predictions, facilitates the fabrication of 3D-printed parts with the desired mechanical characteristics.

Optimizing Energy Consumption, Surface Quality, and Production Time in Fused Deposition Modeling Based 3D Printing of Polylactic Acid Polymers

Maximizing performance and efficiency in 3D printing of polylactic acid biomaterials: Unveiling of microstructural morphology, and implications of process parameters and modeling of the mechanical strength, surface roughness, print time, and print energy for fused filament fabricated (FFF) bioparts

On the optimized fused filament fabrication of polylactic acid using multiresponse central composite design and desirability function algorithm

Optimization of printing parameters in fused deposition modeling for improving part quality and process sustainability

Optimizing FDM process parameters: predictive insights through taguchi, regression, and neural networks

Optimization of 3D Printing Parameters for Enhanced Surface Quality and Wear Resistance

Correlation between Infill Percentages, Layer Width, and Mechanical Properties in Fused Deposition Modelling of Poly-Lactic Acid 3D Printing

Parametric Optimization of 3D Printing Process

A response surface methodology investigation into the optimization of manufacturing time and quality for FFF 3D printed PLA parts

Analyzing the effects of printing parameters to minimize the dimensional deviation of polylactic acid parts by applying three different decision-making approaches

Pattern optimization for 3D printing of composite filament materials with natural fibers and polylactic acid

Mechanical Performance over Energy Expenditure in MEX 3D Printing of Polycarbonate: A Multiparametric Optimization with the Aid of Robust Experimental Design

Optimization of the Print Quality by Controlling the Process Parameters on 3D Printing Machine

Effect of process parameters on flexural strength and surface roughness in fused deposition modeling of PC-ABS material

Optimization of Environment-Friendly and Sustainable Polylactic Acid (PLA)-Constructed Triply Periodic Minimal Surface (TPMS)-Based Gyroid Structures

Effect of printing parameters and post-process on surface roughness and dimensional deviation of PLA parts fabricated by extrusion-based 3D printing

A comprehensive review on fused deposition modelling of polylactic acid

Experimental study and optimizing the FDM process using war strategy optimization technique to enhance mechanical properties and surface quality of the PLA thermoplastic

OPTIMIZATION OF ANNEALING AND 3D PRINTING PROCESS PARAMETERS OF PLA PARTS

Investigation of Fused Deposition Modelling Process Parameters in 3D Printing for Composite Material (Poly Lactic Acid and Banana Fibre)

Impact of process parameters on improving the performance of 3D printed recycled polylactic acid (rPLA) components