Abstract:Fused deposition modelling (FDM) is a popular additive manufacturing process used for rapid prototyping and the production of complex geometries. Despite its popularity, FDM's susceptibility to variations in numerous process parameters can significantly impact the quality, design, functionality, and mechanical properties of 3D printed parts. This study explores thirteen FDM process parameters and their influence on the mechanical properties of polylactic acid (PLA) polymer, encompassing surface roughness, warpage, tensile and bending strength, elongation at break, deformation, and microhardness. The optimum parameters were identified alongside key contributors by applying the Taguchi method, signal-to-noise ratios, and analysis of variances (ANOVA). Notably, specific FDM parameters significantly affect the surface profile, with layer thickness contributing 32.65% and fan speed contributing 8.59% to the observed variations. Similarly, warping values show notable influence from nozzle temperature (29.53%), wall thickness (16.74%), layer thickness (16.56%), and retraction distance (12.80%). Tensile strength is primarily determined by wall thickness (31.83%), followed by infill percentage (26.73%) and infill pattern (16.18%). Elongation at break predominantly correlates with wall thickness (44.82%), with a supplementary contribution from nozzle temperature (10.90%). Microhardness lacks a dominant parameter. Bending strength variations primarily arise from layer thickness (38%), wall thickness (37.6%), and infill percentage (9.17%). Deformation tendencies are influenced by layer thickness (19.20%), print speed (11.37%), wall thickness, and fan speed (10.9% each). The optimized dataset of FDM process parameters was then employed in two prediction models: multiple-regression and artificial neural network (ANN). Evaluation based on the correlation coefficient (R2) and root mean squared error (RMSE) indicates that the ANN model outperforms the multiple-regression approach. The results indicate that precise control of FDM parameters, coupled with ANN predictions, facilitates the fabrication of 3D-printed parts with the desired mechanical characteristics.

OPTIMIZATION OF ANNEALING AND 3D PRINTING PROCESS PARAMETERS OF PLA PARTS

A response surface methodology investigation into the optimization of manufacturing time and quality for FFF 3D printed PLA parts

Optimization of Polylactic Acid 3D Printing Parameters Based on Support Vector Regression and Cuckoo Search

Optimization of FDM Process Parameters for Mechanical Properties of Aerospace Parts Based on Kriging and CS

Studying the effects of FDM process parameters on the mechanical properties of parts produced from PLA using response surface methodology

Optimization of Process Parameters of Fused Filament Fabrication of Polylactic Acid Composites Reinforced by Aluminum Using Taguchi Approach

On the optimized fused filament fabrication of polylactic acid using multiresponse central composite design and desirability function algorithm

Experimental study and optimizing the FDM process using war strategy optimization technique to enhance mechanical properties and surface quality of the PLA thermoplastic

Optimizing FDM process parameters: predictive insights through taguchi, regression, and neural networks

Investigation of the Mechanical Properties, Surface Quality, and Energy Efficiency of a Fused Filament Fabrication for PA6

Machine Learning Study of the Effect of Process Parameters on Tensile Strength of FFF PLA and PLA-CF

An Investigation of 3D Printing Parameters on Tensile Strength of PLA Using Response Surface Method

Effect of Printing Parameters on the Mechanical Properties of Parts Fabricated with Open-Source 3D Printers in PLA by Fused Deposition Modeling

Optimization of tensile strength in 3D printed PLA parts via meta-heuristic approaches: a comparative study

Investigating the Effects of Annealing on the Mechanical Properties of FFF-Printed Thermoplastics

Mathematical and Statistical Analysis of Fused Filament Fabrication Parameters for Thermoplastic Polyurethane Parts via Response Surface Methodology

Optimization of printing parameters in fused deposition modeling for improving part quality and process sustainability

Mechanical Strength Optimization of Printing Parameters Using RSM for Sustainable 3D Printing Material

Effect of print parameters on the tensile strength and built time of FDM-printed PLA parts

Parametric Optimization of FDM Process for PA12-CF Parts Using Integrated Response Surface Methodology, Grey Relational Analysis, and Grey Wolf Optimization

Effects of process parameters on the quality of PLA products fabricated by fused deposition modeling (FDM): surface roughness and tensile strength