Abstract:In recent years, global warming and climate change caused by the greenhouse gas emissions has given rise to widespread concerns. CO2 has been considered as the principal greenhouse gas of interest, and fossil-fuel-fired power plants have been deemed as the largest stationary sources of CO2 emission. It is imperative to capture CO2 from these sources to reduce the global CO2 emissions. Lately, capturing CO2 from flue gas using solid absorbents shows promising for CO2 abatement. For the cost-effective CO2 capture process and the recycling of environmental pollutants, deprecated resources have been utilized for CO2 capture from flue gas. In this work, fly ashes derived from different raw materials were tried as solid CO2 sorbents for flue gas treatment. To improve their CO2 capture capacities, the ashes were modified by different polyamines. An experimental demonstration on CO2 capture behaviors of fresh ashes and modified sorbents in simulated flue gas atmosphere of 40°C, 15% CO2 + 15% H2O and balanced N2 was presented in detail with a fixed-bed reactor system. CO2 capture capacities of fresh ashes were calculated as 0.56 mmolCO2/g, 0.32 mmolCO2/g, 0.44 mmolCO2/g and 0.83 mmolCO2/g, respectively. By contrast, CO2 capture capacities of amine-modified samples had been enhanced as 0.38 mmolCO2/g, 0.65 mmolCO2/g, 1.07 mmolCO2/g, 0.85 mmolCO2/g and 1.17 mmolCO2/g. The optimal sample of TEPA-modified biomass ash (TEPA-BA) with CO2 capture capacity of 1.17mmolCO2/g was screened. The optimal candidate was then selected for further investigation of the effects of temperature, CO2 concentration and H2O concentration on its CO2 capture behaviors. The results indicated that CO2 capture capacity would increase with the increase of temperature in the range of 30 to 40 °C and decrease with the increase of temperature in the range of 40 to 60°C, increase with the increase of CO2 concentration in the range of 5% to 20%, increase with the increase of H2O concentration in the range of 0% to 15% and decrease with the increase of H2O concentration in the range of 15% to 20%. The results in this work could provide basic data as a guidance for further applying the sorbents in practical operations.

Production of bagasse fly ash-derived CO 2 adsorbent by physical activation and by nitrogen-functionalization using hydrothermal treatment

Production of Bagasse Fly Ash-Derived CO2 Adsorbent by Physical Activation and by Nitrogen-Functionalization Using Hydrothermal Treatment

Utilization of Bagasse Fly Ash for the Production of Low-Cost Ammonia Adsorbents in Poultry Farm.

Designing microporous activated carbons from biomass for carbon dioxide adsorption at ambient temperature. A comparison between bagasse and rice by-products

Synthesis of bio-based materials from agricultural residues for treatment of petrochemical wastewater

Production of Sustainable Adsorbents for CO2 Capture Applications from Food Biowastes

Solid Waste of Fly Ash toward Energy-Efficient CO 2 Capture

Preparation of porous carbon from hydrothermal treatment products of modified antibiotic mycelial residues and its use in CO 2 capture

Enhanced CO2 Sorption Capacity of Amine-Tethered Fly Ash Residues Derived from Co-Firing of Coal and Biomass Blends

A novel amine functionalized porous geopolymer spheres from municipal solid waste incineration fly ash for CO2 capture

Porous activated carbons derived from waste sugarcane bagasse for CO2 adsorption

Activation behavior of the novel CO 2 foaming agent for mining on fly ash

Amine Infused Fly Ash Grafted Acrylic Acid/Acrylamide Hydrogel for Carbon Dioxide (CO2) Adsorption and Its Kinetic Analysis

Synthesis of carbon fiber aerogel from natural bamboo fiber and its application as a green high-efficiency and recyclable adsorbent

Studies on Several Fly Ashes and Their Modified Materials for CO2 Capture

Preparation of Activated Carbon from Co-Pyrolysis Activation of Fly Ash and Biomass

Exploring the structural characteristics and adsorption capabilities of cost-effective N- doped activated carbon derived from waste biomass for CO2 adsorption

Cellulose–Amine Porous Materials: The Effect of Activation Method on Structure, Textural Properties, CO2 Capture, and Recyclability

Fly ash as a cost-effective catalyst to promote sorbent regeneration for energy efficient CO 2 capture

Preparation of Activated Carbon Adsorption Materials Derived from Coal Gasification Fine Slag Via Low-Temperature Air Activation

The fabrication of porous N-doped carbon from widely available urea formaldehyde resin for carbon dioxide adsorption