Abstract:The excessive presence of antibiotics such as Oxytetracycline (OTC) in the wastewater has increased health problems due to their toxic impact on the aquatic ecosystem. Therefore, their removal has become an important topic. This study aims to produce high surface area-activated carbon derived from low-cost and environmentally friendly barley lignocellulosic wastes to remove OTC from aqueous solutions. The synthesized barley wastes-activated carbon (BW-AC) was characterized using Fourier-Transform Infrared spectroscopy, Thermal Gravimetric Analysis, X-ray diffraction analysis, N 2 adsorption/desorption isotherms, and Scanning Electron Microscopy. A Central Composite Design under the Response Surface Methodology (CCD-RSM) was applied to optimize the operational parameters (adsorbent dosage, pH, OTC initial concentration, and contact time) affecting the adsorption capacity as the response factor. The optimum condition of OTC adsorption by BW-AC was the adsorbent dosage of 16.25 mg, pH of 8.25, initial concentration of 62.50 mg/L, and contact time of 23.46 min. An analysis of variance (ANOVA) was performed to investigate the significance of the designed quadratic model and evaluate the parameters interactions. The linear regression coefficient (R 2 ) of 0.975 shows a good correlation between predicted and actual results. The adsorption isotherms were used to determine the contaminant distribution over the adsorbent surface, and the equilibrium data was best described by the Freundlich isotherm due to the R 2 value of 0.99 compared to other isotherms and β parameter of 0.23 in Redlich-Peterson equation. Moreover, the n value of 1.25 in Freundlich equation and E value of 0.31 in Dubinin–Radushkevich equation indicates a physical nature of adsorption process. According to the equations results, the maximum adsorption capacity of BW-AC for OTC removal was 500 mg/g, based on the Langmuir isotherm equation. In addition, the thermodynamic studies indicated an endothermic process based on the 0.31 value of ΔH° and spontaneous nature due to the negative amount of ΔG° within the temperature range of 288–318 K. Consequently, the prepared BW-AC can be deemed as a highly effective adsorbent with a large surface area, resulting in significant capacity for removing OTC. This synthesized BW-AC can serve as an environmentally friendly adsorbent for affordable wastewater treatment and is poised to make valuable contributions to future research in this field.

Synthesis of bio-based materials from agricultural residues for treatment of petrochemical wastewater

Treatment of surfactant-stabilized oily wastewater using coalescing bed of bagasse fly ash (BFA) as a low-cost filter medium: modelling and optimization of process parameters

Utilization of chemically modified coal fly ash as cost-effective adsorbent for removal of hazardous organic wastes

Production of Bagasse Fly Ash-Derived CO2 Adsorbent by Physical Activation and by Nitrogen-Functionalization Using Hydrothermal Treatment

Adsorption and leaching of fluorotelomer compounds and perfluoroalkyl acids in aqueous media by activated carbon prepared from municipal biosolids

Production of bagasse fly ash-derived CO 2 adsorbent by physical activation and by nitrogen-functionalization using hydrothermal treatment

Composites of sodium alginate based - Functional materials towards sustainable adsorption of benzene phenol derivatives - Bisphenol A/Triclosan

Removal of Perfluorinated Carboxylates from Washing Wastewater of Perfluorooctanesulfonyl Fluoride Using Activated Carbons and Resins.

Removal Ofβ-Naphthalenesulfonic Acid from Aqueous Dilute Solution Using Bagasse Fly Ash

Novel sulfonic groups grafted sugarcane bagasse biosorbent for efficient removal of cationic dyes from wastewater

Designing microporous activated carbons from biomass for carbon dioxide adsorption at ambient temperature. A comparison between bagasse and rice by-products

Activated carbon from agricultural industry waste for use as an adsorbent of sulfamethazine: Fascinating and environmentally friendly process

A feasible biochar derived from biogas residue and its application in the efficient adsorption of tetracycline from an aqueous solution

Bentonite blended with bagasse ash as an adsorbent for reactive red 198 dyes

Efficient removal of tetrabromobisphenol A using microporous and mesoporous carbons: The role of pore structure

Experimental and theoretical study of the adsorption of mixed low carbon alcohols and acids from Fischer Tropsch synthesis wastewater by activated carbon

Prospective Life Cycle Assessment Prospective (LCA) of Activated Carbon Production, Derived from Banana Peel Waste for Methylene Blue Removal

Novel Perfluorooctanesulfonate-Imprinted Polymer Immobilized on Spent Coffee Grounds Biochar for Selective Removal of Perfluoroalkyl Acids in Synthetic Wastewater

Evaluating the pre-treatment protocol required to produce an effective carbonized waste adsorbent for organic pollution control

Removal of bisphenol a from wastewater by adsorption and membrane separation: Performances and mechanisms

Optimizing oxytetracycline removal from aqueous solutions using activated carbon from barley lignocellulosic wastes with isotherms and thermodynamic studies