Abstract:The optimal contribution of electronic carriers in polymeric mixed ionic-electronic conducting (MIEC) films was explored to achieve high thermoelectric (TE) conversion at a low temperature gradient (ΔT) using poly(2-acrylamido-2-methyl-1-propanesulfonic acid) (P), potassium ferricyanide (F), and well-dispersed graphene flakes (G). In this composite (PFG) film, the active carriers were identified as CN- and electrons. The sulfonate groups in P effectively dispersed the graphene flakes into nanoscale electronic channels, while P and F provided ionic channels for CN− transport. By systematically varying the G content and humidity, a series of MIECs with broad electronic (σe) and ionic (σi) conductivity ranges were developed. Among these, the PFG film containing 3 wt% G (PFG3) exhibited a remarkable total Seebeck coefficient (S) of over -40 mV K-1 under a ΔT of 5.3 K at 80 % RH at room temperature. Additionally, PFG3 demonstrated stable voltage output (Vout) even after 3,000 sec. From the residual Vout, the electronic Seebeck coefficient (Se) was determined to be –990 uV K-1, the highest value reported for polymeric TE films. The simultaneous enhancement of Se and S in the same film indicated an optimized balance of electronic and ionic carrier contributions, further confirmed by the transference numbers and the conductivity ratio (σe/σi). The power density (PD) of the PFGs was also found to depend on the σe/σi, underscoring the importance of the controlling carrier contributions. Despite its MIEC nature, PFG3 efficiently transported electronic carriers through G channels, and the relationship between of Se vs σe aligned with a degenerate electronic model for PFGs. Scaling up the PFG3 film into a TE module yielded an energy density of 36.0 J m-2 and PD of 18.6 mW m-2 for a ΔT of 4.9K. The practical potential of the PFG system was demonstrated by successfully powering a diode for an extended period using TE energy harvesting and light-triggered photo-TE systems, highlighting the versatility and promise of this material for low-grade thermal energy applications.

High thermoelectric conversion through an optimal contribution of electronic carriers in polymeric mixed ionic-electronic conducting films

Ultrahigh performance polyvinylpyrrolidone/Ag2Se composite thermoelectric film for flexible energy harvesting

Mixed Ionic-Electronic Conducting Hydrogels with Carboxylated Carbon Nanotubes for High Performance Wearable Thermoelectric Harvesters

High Thermoelectric Performance in Solution‐Processed Semicrystalline PEDOT:PSS Films by Strong Acid–Base Treatment: Limitations and Potential

Developing printable thermoelectric materials based on graphene nanoplatelet/ethyl cellulose nanocomposites

Thermoelectric Performance Enhancement of Film by Pulse Electric Field and Multi‐Nanocomposite Strategy

High performance Ag2Se/Ag/PEDOT composite films for wearable thermoelectric power generators

High-performance flexible thermoelectric generators with tunable in-plane and out-of-plane architectures

A Polymer Film with Very High Seebeck Coefficient and Overall Thermoelectric Properties by Secondary Doping, Dedoping Engineering and Ionic Energy Filtering

Bi0.5Sb1.5Te3/PEDOT:PSS-based flexible thermoelectric film and device

Conductive PEDOT:PSS-Based Organic/Inorganic Flexible Thermoelectric Films and Power Generators

Achieving High Thermoelectric Performance in Bi2(Te, Se)3 Thin Film with (00 l)-Oriented by Incorporating Tellurization and Selenization Processes

Flexible n-type thermoelectric composite films with enhanced performance through interface engineering and post-treatment

Flexible Bi2Te3/PEDOT nanowire sandwich-like films towards high-performance wearable cross-plane thermoelectric generator and temperature sensor array

Flexible hydrogel with a coupling enhanced thermoelectric effect for low-grade heat harvest

Ionic Liquid Gating Enhanced Photothermoelectric Conversion in Three-Dimensional Microporous Graphene

Electrochemical Preparation and Regulation of Flexible Polypyrrole Film toward Enhanced Thermoelectric Performance

PEDOT:PSS/PVA/Te ternary composite fibers toward flexible thermoelectric generator

A double network facilitated ion-electron conductor for thermoelectric harvesting with high energy density

Preparation and Characterization of Screen-Printed Cu2S/PEDOT:PSS Hybrid Films for Flexible Thermoelectric Power Generator

Improved thermoelectric performance of PEDOT:PSS/Bi2Te3/reduced graphene oxide ternary composite films for energy harvesting applications