Abstract:The heating problems in electronic devices have become even more significant with the development of technology and the rapid increase in areas of use. In cases where passive cooling and active cooling processes are not sufficient to improve overheating in electronic devices, high temperature generation is prevented by liquid cooling if convenient. The effect of nanofluid use on heat transfer to improve the thermal performance of liquid cooling systems was examined with computational fluid dynamics from numerical methods in this research. For different cooler designs, both single‐phase and multiphase modeling methods were utilized in fluid modeling in the research involving forced convection and heat transfer in laminar and turbulent flow. The mathematical models utilized were validated on different experimental and numerical researches. The single‐phase modeling was conducted for pure H2O, 1% Al2O3, 5% Al2O3 nanofluids at different Reynolds numbers. The analyzes were conducted at different Reynolds values and the increase in Reynolds value decreases the maximum temperature value at the output. In the multiphase modeling method, the nanofluid Al2O3 is defined and modelled as a separate phase suspended in different sizes into the base fluid H2O. The use of nanofluid increased the thermal conductivity in both methods compared to the use of pure H2O. At the same time, the use of nanofluids at 5% concentration gave better results than 1% concentration. As the temperature distributions are examined, the Mixture model, one of the single‐phase and multiphase modeling methods, presents very similar distributions. The effect of nanofluids on thermal performance varies depending on many parameters. A significant one is the size of the suspended nanoparticle. Different particle sizes, 20, 30, and 40 nm, were investigated in both Mixture and Eulerian modeling approaches in this research. Two different design coolers were utilized in the researches. In these designs, the flow is distributed in parallel and serpentine. The flow distribution and pressure drop also had an effect on thermal performance. The temperatures were read lower in the serpentine block, which provides a more regular flow distribution.

Effects of shark bionic V-groove structures and nanofluids on thermal management of electronic components

A novel composite bionic leaf vein and honeycomb microchannel heat sink applied for thermal management of electronic components

Thermal management of electronic components based on new wave bio-inspired structures and nanofluids

Thermohydraulic Performance Optimization of Integrated Porous Pin Fins in Microchannel Heat Sink Using Shape Optimization Coupled with NSGA

Performance analysis of axial air cooling system with shark-skin bionic structure containing phase change material

Nanofluids in microchannel heat sinks for efficient flow cooling of power electronic devices

Solar radiation and heat sink impact on fluctuating mixed convective flow and heat rate of Darcian nanofluid: Applications in electronic cooling systems

Numerical Study of Enhanced Heat Transfer of MicroChannel Heat Sink with Nanofluids

Effects of pin fins and vortex generators on thermal performance in a microchannel with Al2O3 nanofluids

Analyzing Heat Transfer: Experimental and Theoretical Studies on Metal Oxide-Based Binary Nanofluid in Mini Hexagonal Tube Heat Sink

Design of single and two phase modeled nanofluid CPU cooler and their numerical analysis

Secondary vortex drag reduction and heat transfer enhancement of nanofluids in hierarchical microchannels applied to thermal management of electronic components

Application of CNTs/H2O nanofluid and the wavy fin with dimples in thermal management of CPU: A numerical modeling of hybrid passive cooling

Investigation on thermal performance of nanofluids in a microchannel with fan-shaped cavities and oval pin fins

Heat transfer enhancement, entropy generation and temperature uniformity analyses of shark-skin bionic modified microchannel heat sink

Cooling electronic components by using nanofluids: a review

Influence on Fluid Flow and Heat Transfer of a Bionic Fin in Plate-fin Heat Exchanger

Design of micro-nano structures for counter flow diverging microchannel heat sink with extraordinarily high energy efficiency

Comparison of cooling performance of nanofluid flows in mini/micro-channel stacked double-layer heat sink and single-layer micro-channel heat sink

Numerical Investigations of Heat Transfer and Fluid Flow Characteristics in Microchannels with Bionic Fish-Shaped Ribs

Experimental study of dielectric liquid spray cooling on multi-scale structured surfaces inspired by leaf veins