Abstract:High shear mixers (HSMs), with their unique advantages of high shear forces and a wide operational range, are commonly used in nanoparticle deagglomeration. This study explores a novel approach to intensifying nanoparticle deagglomeration in a 100 mPa‧s viscous system using HSMs combined with low-speed stirring. The effects of main operating and structural parameters were experimentally investigated. The results show that the teethed HSM outperforms the blade-screen HSM, achieving a smaller attainable size (114 nm vs. 210 nm) and a higher fine particle generation fraction (46.08% vs. 18.77%). Increasing HSM size directly affects the energy input (from 6.478 MJ/kg to 31.879 MJ/kg), which influences the deagglomeration mechanism and kinetics but does not affect the smallest attainable size (117 nm). Higher solid contents improve energy efficiency, while low-speed stirring, though not altering the deagglomeration mechanism, enhances its kinetics. The process intensification factor (S) and energy efficiency factor (εm) were defined to evaluate the intensification of low-speed stirring. Increasing the impeller speed enhances this effect. The PBT impeller with a diameter ratio of 0.35 is identified as the ideal structure in this study, improving deagglomeration performance by 8.26% while reducing energy consumption by 8.3%. These results provide guidance for optimizing processes and improving deagglomeration performance through the combination of low-speed stirring in viscous systems for process industries.

Effect of high stirring speed on the agglomerate behaviors for cohesive SiO 2 powders in gas fluidization

Effect of Agitation on the Fluidization Behavior of a Gas–solid Fluidized Bed with a Frame Impeller

Research Progress of Granular Flow and Fluidization Behavior of Coarse Cohesive Particles

Characterization of Flow Pattern of Cohesive Particles in Gas-Solid Fluidized Bed Via Axial Distribution of Particle Motions

Experimental Investigation of Bubble and Particle Motion Behaviors in A Gas-Solid Fluidized Bed with Side Wall Liquid Spray

Evolution and Fluidization Behaviors of Wet Agglomerates Based on Formation-Fragmentation Competition Mechanism

Particle Agglomeration and Control of Gas-Solid Fluidized Bed Reactor with Liquid Bridge and Solid Bridge Coupling Actions

Nanoparticle Deagglomeration Driven by a High Shear Mixer and Intensification of Low-Speed Stirring in a Viscous System

Experimental Study on the Fluidization Behaviors of the Superfine Particles

Effect of Cohesive Particle Addition on Bubbling Characteristics of Gas-Solid Fluidized Bed: Meso-scale Mechanism

Fluidization and agglomerate structure of SiO2 nanoparticles

Stirrer design for improving fluidization of cohesive powder: A time-resolved X-ray study

Enhancing Fluidization Quality of Nanoparticle Agglomerates by Combining Vibration, Stirring and Jet Assistances

Multi-stage agglomerate structure and solids mixing behavior of nano-particle in fluidized bed

A Numerical Investigation on Segregation in Gas-Fluidized Beds of Short, Flexible Fibers

Agglomeration Parameters and Drag Coefficients in Agglomerate Particulate Fluidization of SiO_2 Nanoparticles

Effects of Interparticle Forces on Fluidization Characteristics in Liquid-Containing and High-Temperature Fluidized Beds

AGGLOMERATE PARTICULATE FLUIDIZATION OF PRIMARY NANO-PARTICLES

Fluidization Behaviors of Nanoparticle Agglomerates with High Initial Bed Heights

Experimental and numerical investigations on the hydrodynamics of gas-solid fluidized bed with an inclined agitator

Numerical Study on Flow Behavior of Ultrafine Powders in Conical Spouted Bed with Coarse Particles