Abstract:The variation of the grain and precipitate structure plays a rather important role on the response of the 7003-T6 Al-Zn-Mg-Cu alloys to high speed deformation but related reports are limited. This paper represents a detailed investigation about the flow behavior and microstructure evolution of these alloys under high strain rate impacting. Methods such as split Hopkinson pressure bar testing, optical and TEM microscopy, Vickers hardness testing, etc. were employed. Features such as plastic compression, tilting, distortion, elongation and refinement manners of the grains as deformation proceeds were studied. The changes of the precipitates in phase type, size and density, and their contribution to the flow stress during this thermo-mechanical process was investigated. The results show that the motion of dislocations and temperature rising induced by the impact work were responsible for these microstructure changes. Deformed shear bands with elongated grains formed in the diagonal direction of the sample when total strain reached 0.17. Prototype of the refined grain structure in these bands was constructed when the dislocation walls accumulate in the triangle grain boundary and form closed cells. With the assist of localized temperature rising and further increase of the strain to above 0.19, the deformed shear band was finally changed into transformed shear band with fine recrystallized grain structure in the center. Dynamic re-precipitation including phase transformation from GPII zones to ƞ′ and then to ƞ, coarsening in size and then dissolving was promoted. Elevated temperature and multiplied dislocation facilitated these processes. Precipitation coarsening in the matrix and dissolving in the ASB played a significant role of softening in the flow behavior as a counterbalance of the deformation and geometric hardening. A schematic model considering both of the grain structure and precipitate evolutions was established and discussed.

Precipitation and aging phenomena in an ultrafine grained Al-Zn alloy by severe plastic deformation

Atomic-scale study on the precipitation behavior of an Al-Zn-Mg-Cu alloy during isochronal aging

Effect of Post-Aging on Microstructure and Mechanical Properties of an Ultrafine-Grained 6061 Aluminum Alloy

Microstructures and Mechanical Properties of Ultrafine Grained 7075 Al Alloy Processed by ECAP and Their Evolutions During Annealing

Microstructures and Mechanical Properties of Al-Zn-Mg-Cu Alloys under Multi-Directional Severe Strain and Aging

Effect of Over-Aging Degree on Microstructures, Precipitation Kinetics, and Mechanical Properties of an Ultra-High-Strength Al-Zn-Mg-Cu Alloy

In situ thermomechanical processing to avoid grain boundary precipitation and strength-ductility loss of age hardening alloys

Enhanced mechanical properties in ultrafine grained 7075 Al alloy

Effects of aging treatment on the microstructures and slow strain tensile properties of 7000 series ultra-high strength aluminum alloy

Effect of Pre-Ageing Treatment on Second Nucleating of GPII Zones and Precipitation Kinetics in an Ultrafine Grained 7075 Aluminum Alloy

Re-ageing Behavior of Retrogressive Precipitated Phase Caused by Severe Plastic Deformation

Experimental and Simulation Study for the Influence of Thermal Pre-Deformation on Subsequent Aging Precipitation Kinetics of Al-Zn-Mg-Cu Alloy

Grain Structure and Precipitate Variations in 7003-T6 Aluminum Alloys Associated with High Strain Rate Deformation

Precipitation Behavior during Aging Operations in an Ultrafine-Grained Al–Cu–Mg Alloy Produced by High-Strain-Rate Processing

Precipitation behavior of an Al–Cu–Li–X alloy and competing relationships among precipitates at different aging temperatures

Altered age-hardening behavior in the ultrafine-grained surface layer of Mg-Zn-Y-Ce-Zr alloy processed by sliding friction treatment

Effect of Precipitates Evolution on Mechanical Properties of Al 7050 Alloy During Secondary Aging

Achieving superior strength and ductility synergy in bulk ultrafine grained Al-Mg-Sc-Zr alloy via powder pre-aging

Early-stage precipitation in Al?Zn?Mg?Cu alloy (7050)

Evolution of precipitates during two-stage stress-aging of an Al-Zn-Mg-Cu alloy