Abstract:The construction industry's high energy consumption and carbon emissions negatively impact the ecological environment; large-scale construction projects consume much energy and emit a significant amount of CO2 into the atmosphere. Statistics show that 30% of energy loss and 40% of solid waste in the construction industry are generated during construction. Therefore, reducing emissions during construction has significant research potential and value. Many scholars have recently studied eco-friendly building materials to facilitate the use of high-carbon emission materials like cement. Adding fibers to composite materials has become a research hotspot among these studies. Although adding fibers to composite materials has many advantages, it mainly reduces the compressive strength of the composite material. This research used the response surface methodology (RSM) to optimize the raw material ratios and thus improve the performance of plant fiber composite materials. Single-factor experiments were conducted to analyze the effects of grass size, grass content, and quicklime content on the composite materials' compressive strength, flexural strength, and water absorption. The influencing factors and levels for the response surface experiment were determined based on the results of the single-factor analysis. Using the response surface methodology (RSM), a second-order polynomial regression model was established to analyze the interaction effects of the three factors on the composite materials' compressive strength, flexural strength, and water absorption rate. The optimal ratio was determined: the optimized options for grass size, grass content, and quicklime content are 2.0 mm, 8.2 g, and 38 g, respectively. The actual values of compressive strength, flexural strength, and water absorption rate of the composite materials made according to the predicted ratio are 11.425 MPa, 2.145 MPa, and 21.89%, respectively, with a relative error of 8% between the actual and predicted values. X-ray diffraction and scanning electron microscopy were also used to reveal the factors contributing to the relatively high strength of the optimized samples.

Research on optimizing performance of desulfurization-gypsum-based composite cementitious materials based on response surface method

Optimization of Formula for Stabilizing Muddy Soil Using Response Surface Methodology

Multi-objective optimization of properties on polymer fiber-reinforced desulfurization gypsum-based composite cementitious materials

Effects of Different Admixtures on the Mechanical and Thermal Insulation Properties of Desulfurization Gypsum-Based Composites

Multi-objective Optimization of Seawater Mixing in Cement-Based Materials with Supplementary Cementitious Materials Using Response Surface Methodology

Performance Characterization and Composition Design Using Machine Learning and Optimal Technology for Slag–Desulfurization Gypsum-Based Alkali-Activated Materials

Response Surface Method for Strength Analysis and Proportion Optimization of New Type Sealing Materials

Test and Microstructural Analysis of a Steel Slag Cement-Based Material Using the Response Surface Method

Preparation and Performance Investigation of Optimized Cement-Based Sealing Materials Based on the Response Surface Methodology.

Optimization of Sludge Solidification Ratio in Water Supply Plant Based on Response Surface Method

Effect of Mineral Admixtures on Physical, Mechanical, and Microstructural Properties of Flue Gas Desulfurization Gypsum-Based Self-Leveling Mortar

Optimization of mechanical properties and water absorption behavior of building gypsum by ternary matrix mixture

Research on basalt fiber reinforced phosphogypsum-based composites based on single factor test and RSM test

Multi-objective Optimization of Gap-Graded Cement Paste Blended with Supplementary Cementitious Materials Using Response Surface Methodology

Investigating the sulfate resistance of mortars with multiple mineral admixtures in ammonium-magnesium sulfate solution

Optimization design and mechanical properties of multi-component ecological gelling materials

The Effects of Hardening Accelerator on Microstructure and Mechanical Performance of Fly-Ash Cement-Based Materials Using Response Surface Methodology

A New Model to Predict the Optimal Mix Design of Self-Compacting Concrete Considering Powder Properties and Superplasticizer Type

Study on the Synergistic Preparation of Supplementary Cementitious Materials from Multiple Solid Wastes: Bayer Red Mud and Gold Tailings

Optimization and Modelling of the Physical and Mechanical Properties of Grass Fiber Reinforced with Slag-Based Composites Using Response Surface Methodology

Use of Mixture Design Approach for the Optimization and Performance of Cost-Effective Cementitious Quaternary System: Portland Cement–Fly Ash–Silica Fume–Phosphogypsum