Abstract:<span class="a-plus-plus abstract-section id-a-sec1"> <h3 class="a-plus-plus">Abstract</h3> <p class="a-plus-plus">This study is an experimental investigation of the effectiveness and mechanism of a concept for bluff-body control characterized by combined windward suction and leeward blowing (WSLB). Wind tunnel tests are performed at a subcritical Reynolds number (<em class="a-plus-plus">Re</em>) of 3.33 × 10<sup class="a-plus-plus">4</sup>. Open-loop WSLB is used to control the flow around a cylindrical test model. Distributed suction and blowing nozzles are symmetrically arranged at the front and rear stagnation points. Steady suction and blowing are implemented simultaneously on both surfaces of the cylinder. WSLB control is characterized by the dimensionless momentum of the suction/blowing relative to the incoming airflow. Instantaneous pressure distributions on the midspan of the cylinder surface for the baseline and controlled cases are measured to quantify the modifications of WSLB control to the aerodynamic coefficients of the cylinder. In addition to surface pressure measurements, a particle image velocimetry (PIV) system is used to describe the wake flow structures of the baseline and controlled cylinders. Experimental results demonstrate that WSLB control decreases sectional drag at the midspan and reduces the fluctuating amplitudes of dynamic wind loads acting on the cylinder. The Strouhal number to characterize the vortex shedding frequencies of the controlled cylinders is also found to deviate from that of the natural cylinder. PIV measurement results show that the active blowing positioned at the leeward stagnation point forms a pair of vortices into the cylinder wake that modify the original vortex shedding process. As the blowing vortices convect into the wake, they stretch the unsteady shear flows from the upper and lower sides of the cylinder, increase the vortex-formation length and push the alternative vortex shedding further downstream. It is also shown that a steady and symmetric perturbation imposed on the periodic cylinder flow can reduce the von Karman vortices and modify the mode of wake vortex shedding significantly.</p> </span> <span class="a-plus-plus abstract-section id-a-sec2 outputmedium-all"> <h3 class="a-plus-plus">Graphical abstract</h3> <p class="a-plus-plus">With active control of windward suction and leeward blowing (WSLB), blowing positioned at the leeward stagnation point forms a pair of vortices in the cylindrical wake that modifies the typical vortex shedding process. As the blowing vortices convect downstream, they contribute to detaching the unsteady shear layers from the cylinder. It is shown that a steady and symmetric perturbation imposed on the periodic cylinder flow can lead to a symmetric mode of wake vortex shedding. <span class="a-plus-plus figure category-standard float-no id-figa"> <span class="a-plus-plus media-object"> <img alt="" src="https://static-content.springer.com/image/MediaObjects/348_2018_2676_Figa_HTML.png" class="a-plus-plus"/> </span> </span> </p> </span>

Sensitivity analysis and passive control of cylinder flow

System Identification and Model Predictive Control of Vortex Shedding Behind a Rotating Cylinder

Primary instability, sensitivity and active control of flow past two tandem circular cylinders

Sensitivity-aided active control of flow past twin cylinders

Investigation of Practical Flow Control Methodologies with RANS/LES Hybrid Methods

Second-order adjoint-based sensitivity for hydrodynamic stability and control

Reduced-Order Modelling and Closed-Loop Control of the Cylinder Wake

Active control of the flow past a circular cylinder using online dynamic mode decomposition

Transition control of cylinder wake via Lorentz force

Control of Vortex Shedding from Two Side-by-side Cylinders Using a Pair of Tangential Jets

A zero-net-mass-flux wake stabilization method for blunt bodies via global linear instability

A Lagrangian Analysis of Partial Cavitation Growth and Cavitation Control Mechanism

Stability analysis of separated flows subject to control by zero-net-mass-flux jet

Flow separation control design with experimental validation

Optimal Control of Cylinder Wakes Via Suction and Blowing

Active control and modal decomposition for the flow over a ramp

Sum-of-Squares approach to feedback control of laminar wake flows

Suppression of Vortex Shedding for Flow Around A Circular Cylinder Using Optimal Control

Active control of circular cylinder flow with windward suction and leeward blowing

Control of flow separation over a circular cylinder using synthetic jet

Resolvent-based approach for H2-optimal estimation and control: an application to the cylinder flow